Tripp Lite DWT2647XP owner manual Hang Display onto the Wall Plate, Adjustment

Page 7

3. Hang Display onto the Wall Plate

Wall

Bolt

Tighten the two bolts by using an appropriate phillips screwdriver to secure bracket.

Tilt adjusting knob

Loosen the adjusting knobs to tilt to desired angle then retighten the knobs.

Maintenance

-10°

•Check that the bracket is secure and safe to use at regular intervals(at least every three months).

•Please visit www.tripplite.com/support if you have any questions.

13-09-232-9332A2.indd 7

11/8/2013 2:09:00 PM

Image 7

Contents Tilt Flat Screen Warranty Registration Warranty & Warranty RegistrationComponent Checklist 1a. Mount on Wood Stud Wall 1b. Mount on Solid Brick and Concrete Block For Flat Back Screen Install Adapter BracketsHang Display onto the Wall Plate Adjustment13-09-232 93-32A2revA