PREVENTING RADIO & TV INTERFER- ENCE
Warning this equipment generates, uses and radi- ates radio frequency energy and if not installed and used in accordance with the instruction manual may cause interference to radio and television reception. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commerical environment. Operation of this equip- ment in a residential area is likely to cause interfer- ence, in which case the user at his own expense will be required to take whatever measures may be re- quired to correct the interference.
If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encour- aged to try to correct the interference by one or more of the following measures:
1.Reorient the receiving antenna.
2.Relocate the computer with respect to the re- ceiver.
3.Move the computer away from the receiver.
4.Plug the computer into a different outlet so that computer and receiver and on different branch circuits.
5.Ensure that the mounting screws, attachment connector screws and ground wires are tightly secured.
6.Ensure that good quality, shielded and grounded cables are used for data communica- tions.
If necessary, the user should consult the dealer or an experienced radio/television technician for addi- tional suggestions.
18 | User’s Manual | User’s Manual | 19 |