Roland VC-300HD manual ‘The Processing’―More than just a converter

‘The Processing’―More than just a converter

The VC-300HD has functions that make it considerably more than just a simple format converter. Among the parameters you can access via the MENU button, you will find parameters related to video processing. For example, you can

accent converted video with additional corrections and trimming. Below is a description of the parameters covered by the processing functions.

Item	Item Name	Description and Available Settings
Number
200	Scaling Type	Sets the scaling type.
		Squeeze: Uses the same aspect ratio as the input.	Original Image４：３	16：９
		4:3 NTSC / 480i, PAL / 576i, 1024 x 768,
		800 x 600, 640 x 480
		4:3 (Letterbox), NTSC / 480i
		PAL / 576i
		4:3 (Squeeze), NTSC / 480i
		PAL / 576i
		16:9, 1080i, 720p
		Side Panel/Let Box: Shows the entire image, with black shown in portions where there is no video image.
		4:3, NTSC / 480i, PAL / 576i. 1024 x 768
		800 x 600. 640 x 480
		4:3 (Letterbox), NTSC / 480i
		PAL / 576i
		4:3 (Squeeze), NTSC / 480i
		PAL / 576i
		16:9, 1080i, 720p
		Crop: Displays the image so as to fill the entire screen; does not show the portions extending outside.
		4:3, NTSC / 480i, PAL / 576i, 1024 x 768
		800 x 600, 640 x 480
		4:3 (Letterbox), NTSC / 480i
		PAL / 576i
		4:3 (Squeeze), NTSC / 480i
		PAL / 576i
		16:9, 1080i, 720p
210	Out Zoom	Adjusts the magnification of the output video.
		50－100－200%: Larger numerical values make the image larger.
		* The maximum value that can be selected changes according to the combination of the input video
		format and the output format.
211	Out H Position	Adjusts the horizontal position of the output video when the aspect ratios of the input video and the output
		format are different and "Side Panel/Let" or "Crop" is selected with "200: Scaling Type."
		-100－0 － +100 %: Larger values move the image right.
212	Out V Position	Adjusts the vertical position of the output video when the aspect ratios of the input video and the output
		format are different and "Side Panel/Let" or "Crop" is selected with "200: Scaling Type."
		-100－0 － +100 lines: Larger values move the image up.
220	Noise Reduction	Obscures noise in the input video so it is unnoticeable. If it is set too strong, the video resolution may be
		reduced.
		Off : Do not use 1－63:
		The strength of the Noise Reduction

10