－ +1000 clock May be adjusted in this range

Item

Item Name

Description and Available Settings

Number

221

Enhancement

Emphasizes the edges of the input video. If set too strong, the edges may look jagged.

Off

: Do not use

1－63: Strength of Enhancement

222

Video Red Gain

Sets the gain value for red in the video being output.

－100%: Larger numerical values indicate a stronger red color.

223

Video Green Gain

Sets the gain value for green in the video being output.

－100%: Larger numerical values indicate a stronger green color.

224

Video Blue Gain

Sets the gain value for blue in the video being output.

－100%: Larger numerical values indicate a stronger blue color.

240

AudioDelay Time

Sets the delay applied to the output audio.

0.00－

1.00

－15.00f

* The time per frame changes according to the frame rate in the value set in "300:Video Out Format."

Therefore, the range of values displayed on the screen (???.? ms) is as follows.

0.00 － 500.5 -When the frame rate is 59.94i/59.94p

0.00 － 600.0 -When the frame rate is 50i/50p

250

Audio Low Gain

Sets the low-range gain value for the sound being output.

-12dB－

－ +12dB: Increasing the numerical value increases the low-range gain value.

251

Audio Mid Gain

Sets the mid-range gain value for the sound being output.

-12dB－

－ +12dB: Increasing the numerical value increases the mid-range gain value.

252

Audio High Gain

Sets the high-range gain value for the sound being output.

-12dB－

－ +12dB: Increasing the numerical value increases the high-range gain value.

260

Sync Source

Sets the synchronizing signal input source.

Auto

: Selected automatically.

REF Input: Selects the REF INPUT connector.

Video Input: Selects the video being used.

Internal: Uses the synchronizing signal generated internally.

261

Sync Adjust

Fine tunes the synchronizing signal.

-1000－

－ +1000 clock: May be adjusted in this range.

270

TC Generate

Selects the timecode to embed in the HDV, DV, or HD-SDI output.

* On the VC-200HD, this is set to "Off" at the factory.

Off

: Time code is not embedded. Free Run: Timecode is generated internally. The timecode is generated

from

when the power is turned on or when “271: TC Offset” is set.

Free Run: The time code starts (preset) from the moment settings are made with "271: TC Offset."

Thru

: Use the timecode input from an external source. The timecode that is used will be that which is

embedded in the signal of the video connector being used.

* This setting is ignored when the frame rates of the input video and the output format are different The time

code output here is the same as when "Free Run" is set.

Offset: Output the timecode input from an external source with the offset set with “271: TC Offset” ap-

pended to it. The TC that is used will be that which is embedded in the signal of the video connector being .

used.

271

TC Offset

Sets the offset to apply when “Offset” is selected with “270: TC Generate.” This value will be the

time code's preset value when "Free Run" is set for "270: TC Generate."

The hour (h), minute (m), second (s), and frame (f) values can be set independently for this item.

00h00m00s00f

－23h59m59s24f

00h00m00s00f

－23h59m59s24f

00h00m00s00f

－23h59m59s29f (When the frame rate value set for "300:Video Out Format" is 59.94i or

59.94p)

* The available range for this parameter changes when the "300: Video Out Format" parameter is changed.

* When "Free Run" is set for "270: TC Generate," the time code count is reset when this item setting is

changed.

274

User Bit

Sets the user bit embedded in the timecode when "Free Run" is set with "270: TC Generate."

* Because there is no impact when the value set for "270: TC Generate" is not "Free Run," the input user

bit is passed through without any change. If no user bit is input, "FF FF FF FF" is output. This item sets

each value independently.

－FF,

- FF,

－FF,

- FF: May be adjusted in this range.

275

Drop Frame

Selects drop frame/non-drop frame for the time code when "Free Run" is set with "270: TC Generate."

Drop

: Selects Drop Frame.

Non

Drop: Selects Non-drop Frame.

* The setting is not valid when "1080/50p," "1080/50i," "720/50p," "576/50p," or "576/50i" is selected with

"300: Video Out Format."

*For items 201-212 and 220-224, please adjust while confirming on a video monitor.

*The values enclosed in a box are the factory defaults.