Palsonic TFTV551FHD One or some channels can’t be, Displayed Section, Current input mode

Page 34

Troubleshooting

General

Problem	Possible Solutions
One or some channels can’t be	! These channels may be locked. Please unlock them (see <Rating and Lock Setup>
displayed	section).
	! These channels may be set skipped in the channel list. You may set it to not skipped or
	select them with 0-9 number buttons.

Lost password	! You may use the super password (2580).

Some items can’t be accessed	! If a setting option appears in gray, this indicates that the settings option is unavailable
	in current input mode.

TV cabinet creaks	! When the TV is in use, there is a natural rise in temperature, causing the cabinet to
	expand or contract and may be accompanied by a slight creaking noise. This is not a
	malfunction.

Some settings (such as volume setting, etc.)may not be memorized when the TV loses power or you press main Power Switch to turn off the TV.

!After you make some settings or adjustments, and within 30 seconds you turn off the TV by main Power Switch or the TV loses power, then the settings you have made within 30 seconds may not be memorized. But you can use Power button to switch the TV to standby mode before cutting off the power, then the settings can be memorized.

Control buttons do not operate	! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
	and turn on the unit again.

Note

If your problem is not solved, turn your unit off and then on again.

Cautions:

Never attempt to repair a defective TV yourself.

31

Image 34

Contents N111 AUSTRALIA1300 657Important Information Table of Contents Important Safety Precautions Important Safety Precautions Important Notice To clean this unit, wipe with a soft, dry clothDo not use in hot and cold rooms locations Installing the Batteries Using the Remote ControlPreparations Antenna Connection Power ConnectionInsert the AC plug into a conveniently located AC outlet Identification of Controls Main Unit front view/side viewMain Unit rear view Remote Control Unit Colored buttons RED/GREEN/YELLOW/BLUE DirectHow to connect Connecting a CamcorderConnecting Digital Coaxial Audio ConnectionsTo connect a device using component video Connecting Component VideoConnecting a Computer To play component video from an external deviceHow to connect a device using Hdmi Connection Connecting an Hdmi deviceConnecting a VCR for Recording To play from the device using HdmiList of main menus to help you with operations Basic OperationsMain Menu Overview To navigate through the OSD main menuDisplaying the Information Banner Turning On/Off the PowerSelecting the Input Signal Source Turning OnAuto Channel Search Memorizing the ChannelsManual Searching for DTV programs Setting Audio System Manual Fine TuningManual Searching for ATV programs Labeling Channels Setting Favorite ChannelsOpen the Programme Edit menu To sort channels Channel List ManagementTo skip unnecessary channels To delete channelsChannel and Program Selection Picture Adjustment Customizing the PictureAdjusting the Sound Sound AdjustmentAdjusting the Volume Using the volume buttons VOL+ and VOLNicam Broadcast Selection Stereo/Bilingual Selection for analog channelsAudio Track Selection for digital channels IGR German stereo system BroadcastsLanguage System SetupSystem Setup Hearing ImpairedBlock Program Setup Rating and Lock SetupPassword Setup To create a new passwordLock Tuning Setup Parental Guidance Setup DTV onlyRestoring Factory Default On Timer Setup Timer SetupCurrent Time Setup Time Zone SelectionSleep Timer Setup Off Timer SetupAuto Sleep Setup Program’s information will be displayed EPG OperationOpereation Press Yellow button again to exitTeletext Teletext & SubtitleSubtitle Auto adjust Screen Setup for D-SUBPC ModeScreen Setup Such as position and phaseRemote control does not operate TroubleshootingDouble images Displayed Section Current input modeOne or some channels can’t be Select them with 0-9 number buttonsSpecifications LCD TV5944035030 Ver.1.0