Palsonic TFTV535WS owner manual Basic Operations, Changing Channels, Adjusting the Volume

Basic Operations

Changing Channels

Using the Channel Buttons (CH+ or CH-)

Press the CH+ or CH- to change channels.

When you press the CH+ or CH-, the unit changes channels in sequence. You will see all the channels that the unit has memorised.

You will not see channels that were erased.

Direct Accessing Channels

Press the number buttons to go directly to a channel.

To select a one-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds to go to the selected channel.

To select a two-digit channel: press the 0-9 number buttons to input the channel number and press ENTER or wait for some seconds to go to the selected channel.

To select a three-digit channel: press the 0-9 number buttons to input the channel number one by one, then the unit goes to the selected channel.

Note:

When you use the number buttons, you can directly select channels that were erased.

Using the Return button

Press this button to switch between the current channel and the previous channel.

Adjusting the Volume

Using the volume buttons (VOL+ and VOL-)

Press the VOL+ or VOL- to increase or decrease the volume.

Using the MUTE button

At any time, you can temporarily cut off the sound using the MUTE button. 1 Press the MUTE button and the sound cuts off.

2 To turn mute off, press the MUTE button again.

Note:

In some models, there may be only one menu language available. In this case, the menu language not be adjusted by the user.

17