Palsonic 6827G owner manual Others, Troubleshooting Guide

OTHERS

Troubleshooting Guide

. Before calling service personnel, please check the following chart for a possible cause to the trouble you are experiencing.

Symptoms	.	Check the following items
No power, red indicator is not lit up		Be sure the power cord is plugged in.
Poor colour, poor tint	.	Contrast, colour, tint are not correctly
Spots appear on the screen	.	Possibleadjusted interferences of automobiles,
	.	motorcycle, trolley bus, neon lamps, etc.
		Possible interference of electronic
Stripes appear on the screen		interference from another TV set, a
	.	computer, an electronics game machine, a
		broadcast station, etc.
		This may be caused by reflections from
Double images or "ghosts"	.	nearby mountains or buildings.
		Check the antenna direction.
	.	It is possible that the aerial “lead-in” is
Snowy picture	.	damaged or comes off.
		Check the antenna direction
	.	The batteries may be worn out.
The remote controller does not work	.	The batteries may be installed with their
	.	polarity reversed.
		Even if the picture or the sound is normal,
		changes in the room temperature
TV cabinet creaks		sometimes make the TV cabinet expand or
		contract, making a noise. This does not
	.	indicate a malfunction.
		When the set is switched on, do not shift or
Unevenness in colour in some parts of		move the set around. Sometimes it may
		develop an unevenness in colour in some
the screen.		parts of the screen. This can be eliminated
		by switching off the set with the POWER
		switch and wait for 10 minutes before
		switching on again.

Specifications

Power supply:	AC 240V, 50Hz
Power consumption:	140	W
Dimensions (mm):	775	(W) x 585 (H) x 505 (D)
Weight (kg):	43
CRT:	68cm

TV system & channel range
System	VHF	UHF	CATV
PAL-B/G	2-12	21-69	X~Z+2, S1~S41
Colour system:			PAL-BG, NTSC 3.58/4.43 (AV)
Sound output:			5W + 5W
Accessory:			one remote controller

* Note: Design and specifications are subject to change without notice.

22