Palsonic 7128G owner manual Turning the Power On/Off, To turn the power on/off

OPERATION

Turning the Power On/Off

. The following describes how to turn the TV on/off using the TV's main switch and the remote controller.

To turn the power on/off

1. Press the POWER switch, the red power indicator lights up.

2.Press the button or any one of 0~9 number buttons on the remote controller to turn the set on and the green indicator lights up.

Without using the remote controller, you can directly press VOL or CH or TV/AV button on the set to turn on the TV.

*Note: If there are no input signals to the TV when the TV set is on, a blue background will appear on the screen (when B.B (blue back) is set ON.)

After 15 minutes if there are still no signals to the TV, it will enter into standby mode automatically

3. Press the POWER switch to turn off the set completely.

4.If you want to turn off the TV temporarily, press the button on the remote controller to switch the set to standby mode.

Note:

To prolong the picture tube's life, us a delayed shut-down circuit is adopted. The button functions only when the set is turned on for more than 5 seconds.

Special indication:

Auto-Power-Offfunction: there are two kinds of Auto-Power-Off function:

1.If a vacant channel is tuned or TV broadcast for a day is finished, and the blue background appears on the screen, the TV will automatically turn off after about 15 minutes.

2.Sleep-timer function.

3.OFF timer function

7