Palsonic 7610WSPF owner manual Child lock setting, To display Special functions

Child lock setting

	?
		i
1		2		3
4		5		6	Digit buttons
7				9
		8			MENU
		0/AV
			--/---		CH+/-
					(menu item
		+			select)
MENU		CH		OK	VOL+/-
	VOL		VOL		(volume adjust
	-		+		menu item adjust)
		CH			OK
		-			(exit the menu)
GAME			LOCK
	S.M		P.M		Enter into
					child lock setting
		+
	-		+
		-
		SOUND
		+

* Child lock is an optional function.

Child lock setting

Making use of child lock function, you can lock all the programs to prevent children from viewing them.

1 Press LOCK button on the	Lock		------	Lock
					------
remote control, the Lock
menu bar appears.	Lock
		*****-		Lock	*****-
(or press MENU repeatedly
	Lock		On	Lock Off
to display Special functions
menu. Press CH+/- to select	New		------
Child lock item, then press
VOL+/- to enter.)
	New ------?

2 Input the correct password. (6-digit, the preset password is 123456). After inputting, the screen displays "Lock: On".

3 After one or more seconds the screen will display "New______", now press OK button (or wait for some

time until "New ______" disappear) and the child lock

function is active now, the screen only displays blue back with Lock menu bar.

4 To unlock, input the correct password to set the Child lock to OFF.

Note: the preset password can be changed, the steps are shown below:

After you set the lock to On (or Off), the screen will display "New ______", input the new password, and confirm

again. Now the password has been changed. But make sure to remember the new password.

In child lock OFF mode, if you press LOCK button unintentionally, you can press OK button to exit.

In child lock ON mode, buttons on the TV set can not act. Also most buttons on the remote control can not act.

To avoid forgetting the password, write it down here:

------

24