Palsonic 7118 owner manual TV Video 1 Video 2 Video, To connect Monitor output terminals

To select the input press the VIDEO button on the TV set or the AV button on the remote controller repeatedly until you see the corresponding input indication on the screen. To return to aerial input, press the AV button until it displays programme number, or press direct channel

select button or the CH button.

TV VIDEO 1 VIDEO 2 VIDEO 3

If the colour of video input is abnormal, the colour system setting may be incorrect. Press the

SYS button button to display COLOUR AUTO If not, press the or button until normal colour appears

Note on the S-VIDEO terminal

The S-VIDEO input terminal has priority over the video 1, video 2 VIDEO terminals on the rear and the video 3 VIDEO terminals on the left side. To use equipment connected to the video terminals, disconnect any plug from the S-VIDEO terminal

2. To connect MONITOR output terminals

You can connect a stereo system to the MONITOR output terminals (photo type) on the set to enjoy a high - quality sound from the stereo system. The MONITOR output terminals output the video and audio signals being displayed on the screen.

To external input

(MONITOR)

yellow (video)	Stereo System
white (audio L/MONO)
red (audio R)
	To video input
	signal
	To audio input	(Another VCR for recording)

18