Palsonic 3420S, 3420G, 3420B owner manual To preset channels Manual search

OPERATION

Tuning in (continued)

.

.

Use the MANUAL SEARCH function if desired channels can not be preset with the AUTO- SEARCH or if you would like to preset channels to specific position numbers one by one. It is convenient to set the channel numbers to the same position numbers using MANUAL SEARCH and SKIP functions.

To preset channels (Manual search)

Manual search

If AUTO SEARCH can not preset the desired channels, or you want to preset the desired channels one by one with the preferred channel numbers, please make use of Manual search.

1. Enter into POS.MEMORY menu, press the				or		button to
select and highlight POSITION. Press the				or			button to
select a desired position number (from 00~99).
Note: press the	or	button to select a channel number
within 0.7 second. Press and hold the			or		button for over
0.7 second to select a decimal number.

POS.MEMORY

POSITION01

BANDVHFL

SKIPOFF

SEARCH DOWN

MFTDOWN AUTO MEMORY

! ! ! ! ! ! . . . . . .

2. Press the		or	button to select and highlight SEARCH. Press
the	button to search channels from current channel to higher
channel. Press the				button to search channels from current

channel to lower channel. When a channel is located, the searching stops, this channel is then memorized with the preset channel number.

Note: you can also make use of BAND selection to quicken the searching process in your desired band. Pressing the or button moves the band to the next step in the sequence below.

VHFL VHFH UHF

POS.MEMORY
POSITION	01
BAND	VHFL
SKIP		OFF
SEARCH	DOWN
MFT	DOWN
AUTO MEMORY
! ! ! ! ! ! . . .	.	. .

POS.MEMORY
POSITION	01
BAND	VHFL
SKIP		OFF
SEARCH	DOWN
MFT	DOWN
AUTO MEMORY
! ! ! ! ! ! . . .	.	. .

3. When you want to store another channel with another position, repeat steps 1 & 2 above.

8