Palsonic 3435TS owner manual Selecting Channel/input signal, Selecting channel

Operations

Selecting Channel/input signal

Selecting channel

1 Use Digit buttons

To select one-digit channel

Press --/-- button to	-	Press 0-9 direct	8
display "-".		channel selector.

To select two-digit channel

Press --/-- button	--	1-	18
repeatedly to	Press 1-9 buttons.		Press 0-9 buttons.
display "--".
To select three-digit channel
Press --/-- button	1- -	1- -	168
			Press 0-9 buttons.
repeatedly to	Press 0-9 buttons.

display "1--"

Note: The maximum channel number is 199, the set does not act if the channel number you input is out of the range of 0~199.

2 Use CH+/- buttons

Press CH+ button, the channel number increases; Press CH- button, the channel number decreases.

3 Use previous channel		button
Press	button to switch between the current channel and previous channel.

4 Use TYPE and SELECT buttons

Press TYPE button to select the program type group that you want to watch.

Press SELECT button repeatedly, and the program is switched among the type group.

Selecting the external Input Signal

1

2

Press AV button repeatedly, the screen displays input signal source AV1 or AV2. Select the input signal source you need.

To return to TV mode, you can press AV button or 0-9buttons.

16