Fine Tune, Auto-Program, Blue KEY | Palsonic 3490 instruction

6.The auto-search speed at no signal condition of each band is shown below: VL : 8 Sec

VH : 16 Sec

UHF : 32 Sec

HB : 32 Sec

7.If no station signal is detected after sweeping through all the bands, auto-search will stop at the start of the next band.

FINE TUNE

1.When YELLOW (Fine-Tune) key is pressed, the tuning bar will not be displayed. The current program number which was in green will be changed to yellow.

2.Activation of plus or minus (PR -/+ on local & remote keyboard) key will tune forward or backward based on current band selected as shown in red. When '+' key is pressed, '+ +' symbol will appear at yellow line, and it will disappear immediately after ' + ' key is released. For ' - 'key, '- -' symbol will appear instead of '+ +'.

OSD

SEARCHUH

STORE01

FINE-TUNE- -

AUTOPROGRAM

Red

Green

Yellow

Blue

3.Once fine tuning is completed, the user can then pressed the GREEN key to store new tuning values into current program number. The program number which was in yellow will become green to indicate that STORE operation is completed.

AUTO-PROGRAM

1.If BLUE (Auto-program) key is pressed, the program number will change to blue colour and blue tuning bar will appear to indicate that Auto-program is in operation.

2.It will automatically search through all the bands for any available stations in transmission, and store them consecutively into program number 01 onwards.

3.Progression of operation will be indicated by the moving of bar display, changing of band and program number. Auto-program will be aborted if blue key is pressed a second time.

4.The search speed for auto-programs the same as auto-search.

*To exit menu, press " /- - " key. At local keyboard, press STAND BY key to exit menu.

BLUE KEY

This key activates the language menu as shown: -

OSD

ENGLISH

DEUTSCH

FRANCAIS

ESPONAL

Red, '>' in Red

Green

Yellow

Blue