Palsonic 3498 owner manual Skip Button, Sound Control

4.Press PRESET ON/OFF button to exit preset mode.

The searched program station has been memorised at the present channel position,

5.Repeat 1~ 4 steps to search another channel.

NOTE : * If the same channel position is selected during repeat operation, the former memory will be erased.

*If some channel position is tuned by MANUAL TUNING mode, AFC (automatic frequency control) function is defeated in this channel position.

SKIP BUTTON:

. FUNCTION:

When CHANNEL SELECTOR button is used to select channels, the channel will be skipped if they are set to "SKIP" mode. For example: Set 2~7 channels to "SKIP" mode, the procedure of channel position increasing or decreasing.

				CHANNEL INCREASE
CH		1	2		58		59			CH
		CHANNEL DECREASE
(REMOTE)	1			2		58		59	(THE APPLIANCE)

. OPERATION:

1.Press PSET (PRESET ON/OFF) button to set preset mode.

2.Select a channel by using CHANNEL SELECTOR button.

3.Press "SKIP" button, "SKIP" will be displayed on the screen to indicate that the channel is at "SKIP" mode.

SKIP

3 SKIP

llllllllllllll

4.Repeat 2 ~ 3 steps to skip another channel.

5.Press PRESET ON/OFF button to exit preset mode.

SOUND CONTROL:

.VOLUME CONTROL

Press the (VOL) button to increase volume; the red block on the screen moves right. Press the (VOL) button to decrease volume; the red block on the screen moves left.

. MUTE BUTTON (REMOTE CONTROL UNIT)

When there is a phone-call or a visitor, it can temporarily shut off the sound without affecting the picture.

To resume normal, press the MUTE or VOLUME () button. The previous volume will be displayed for 4 seconds.

6