Palsonic TFTV4200FHD Turning On/Off the Power, Selecting the Input Signal Source, Turning Off

Page 17

Basic Operations (Continued)

Turning On/Off the Power

Turning On

Insert the power cord into the wall outlet. Press the Power Switch on the unit to power on.

If the unit is in standby mode, press Power button on the unit or the remote control to turn on the unit, and you will be ready to use its features.

Turning Off

With the power on, press the Power button on the unit or on the remote control to turn off the unit, and put the unit in standby mode. To cut off the power completely, press the Power Switch directly.

Selecting the Input Signal Source

1 Press SOURCE button.

2 Press 5or 6to select the input source. Options include:

!DTV — Watch the DTV signal.

!ATV — Watch the ATV signal.

!AV — Watch the signal from the AV input terminals.

!Component 1 — Watch the signal from the COMPONENT 1 input terminals.

!Component 2 — Watch the signal from the COMPONENT 2 input terminals.

!D-SUB— Watch the signal from the D-SUB input jack.

!HDMI 1 — Watch the signal from the HDMI 1 input jack.

!HDMI 2 — Watch the signal from the HDMI 2 input jack.

!HDMI 3 — Watch the signal from the HDMI 3 input jack.

Input Source
DTV
ATV
AV
Component 1
Component 2
D-SUB
HDMI 1
HDMI 2
HDMI 3
Move	Select

3 Press 3,4or OK to confirm the selection.

Displaying the Information Banner

Press the INFO button to display the information banner. The information banner displays current status information such as the channel number and signal source.

Depending on the mode, different information is displayed. In DTV mode, more information will be displayed. Below is an example banner in DTV mode.

2ABC TV Sydney

DTV SD MPEG

British Isles: A Natural History			11:08
Fri, Feb 27 2008	11:05		12:00

Subtitle English	Teletext 576i		Next

Reserved for future use

Alan Titchmarsh continues his epic journey around the

British Isles and discovers why they are so diverse.

Note

In DTV mode, the information banner may contain:

!Channel number and name.

!Current time.

!Current program name, start and end play times.

!Next program name and start and end play times.

!TV or Radio.

!Audio mode, audio track.

!Signal strength for current channel.

!Signal resolution.

!Subtitle, teletext.

=The above OSD is only served as an example, and it is in DTV mode.

=

Information banner content varies, depending on the broadcaster and your settings.

14

Image 17

Contents AUSTRALIA1300 657 N111Important Information Table of Contents Important Safety Precautions Important Safety Precautions Do not use in hot and cold rooms locations To clean this unit, wipe with a soft, dry clothImportant Notice Preparations Using the Remote ControlInstalling the Batteries Insert the AC plug into a conveniently located AC outlet Power ConnectionAntenna Connection Identification of Controls PowerMain Unit front view/side view CH+Main Unit rear view Colored buttons RED/GREEN/YELLOW/BLUE Direct Remote Control UnitConnections Connecting digital coaxial audioCoaxial cable Coaxial HIFi SystemConnecting an Hdmi device Connecting a CamcorderConnecting a Computer Connecting Component VideoTo connect a device using component video To play component video from an external deviceTo record program Connecting a VCR for RecordingConnecting Headphones Main Menu Overview Basic OperationsList of main menus to help you with operations To navigate through the OSD main menuSelecting the Input Signal Source Turning On/Off the PowerDisplaying the Information Banner Turning OnManual Searching for DTV programs Memorizing the ChannelsAuto Channel Search Manual Searching for ATV programs Manual Fine TuningSetting Audio System Open the Programme Edit menu Setting Favorite ChannelsLabeling Channels To skip unnecessary channels Channel List ManagementTo sort channels To delete channelsChannel and Program Selection Customizing the Picture Picture AdjustmentAdjusting the Volume Sound AdjustmentAdjusting the Sound Using the volume buttons VOL+ and VOLAudio Track Selection for digital channels Stereo/Bilingual Selection for analog channelsNicam Broadcast Selection IGR German stereo system BroadcastsSystem Setup System SetupLanguage Hearing ImpairedPassword Setup Rating and Lock SetupBlock Program Setup To create a new passwordRestoring Factory Default Parental Guidance Setup DTV onlyLock Tuning Setup Current Time Setup Timer SetupOn Timer Setup Time Zone SelectionAuto Sleep Setup Off Timer SetupSleep Timer Setup Operation EPG OperationProgram’s information will be displayed Press Yellow button again to exitSubtitle Teletext & SubtitleTeletext Screen Setup Screen Setup for D-SUBPC ModeAuto adjust Such as position and phaseDouble images TroubleshootingRemote control does not operate One or some channels can’t be Current input modeDisplayed Section Select them with 0-9 number buttonsLCD TV Specifications5944035790 Ver