Palsonic TFTV4200FHD One or some channels can’t be, Displayed Section, Current input mode

Page 35

Troubleshooting

General

Problem	Possible Solutions
One or some channels can’t be	! These channels may be locked. Please unlock them (see <Rating and Lock Setup>
displayed	section).
	! These channels may be set skipped in the channel list. You may set it to not skipped or
	select them with 0-9 number buttons.

Lost password	! You may use the super password (2580).

Some items can’t be accessed	! If a setting option appears in gray, this indicates that the settings option is unavailable
	in current input mode.

TV cabinet creaks	! When the TV is in use, there is a natural rise in temperature, causing the cabinet to
	expand or contract and may be accompanied by a slight creaking noise. This is not a
	malfunction.

Some settings (such as volume setting, etc.)may not be memorized when the TV loses power or you press main Power Switch to turn off the TV.

!After you make some settings or adjustments, and within 30 seconds you turn off the TV by main Power Switch or the TV loses power, then the settings you have made within 30 seconds may not be memorized. But you can use Power button to switch the TV to standby mode before cutting off the power, then the settings can be memorized.

Control buttons do not operate	! Disconnect the power cord and wait for a few seconds. Then re-plug the power cord
	and turn on the unit again.

Note

If your problem is not solved, turn your unit off and then on again.

Cautions:

Never attempt to repair a defective TV yourself.

32

Image 35

Contents AUSTRALIA1300 657 N111Important Information Table of Contents Important Safety Precautions Important Safety Precautions Do not use in hot and cold rooms locations To clean this unit, wipe with a soft, dry clothImportant Notice Preparations Using the Remote ControlInstalling the Batteries Insert the AC plug into a conveniently located AC outlet Power ConnectionAntenna Connection CH+ PowerIdentification of Controls Main Unit front view/side viewMain Unit rear view Colored buttons RED/GREEN/YELLOW/BLUE Direct Remote Control UnitCoaxial HIFi System Connecting digital coaxial audioConnections Coaxial cableConnecting an Hdmi device Connecting a CamcorderTo play component video from an external device Connecting Component VideoConnecting a Computer To connect a device using component videoTo record program Connecting a VCR for RecordingConnecting Headphones To navigate through the OSD main menu Basic OperationsMain Menu Overview List of main menus to help you with operationsTurning On Turning On/Off the PowerSelecting the Input Signal Source Displaying the Information BannerManual Searching for DTV programs Memorizing the ChannelsAuto Channel Search Manual Searching for ATV programs Manual Fine TuningSetting Audio System Open the Programme Edit menu Setting Favorite ChannelsLabeling Channels To delete channels Channel List ManagementTo skip unnecessary channels To sort channelsChannel and Program Selection Customizing the Picture Picture AdjustmentUsing the volume buttons VOL+ and VOL Sound AdjustmentAdjusting the Volume Adjusting the SoundIGR German stereo system Broadcasts Stereo/Bilingual Selection for analog channelsAudio Track Selection for digital channels Nicam Broadcast SelectionHearing Impaired System SetupSystem Setup LanguageTo create a new password Rating and Lock SetupPassword Setup Block Program SetupRestoring Factory Default Parental Guidance Setup DTV onlyLock Tuning Setup Time Zone Selection Timer SetupCurrent Time Setup On Timer SetupAuto Sleep Setup Off Timer SetupSleep Timer Setup Press Yellow button again to exit EPG OperationOperation Program’s information will be displayedSubtitle Teletext & SubtitleTeletext Such as position and phase Screen Setup for D-SUBPC ModeScreen Setup Auto adjustDouble images TroubleshootingRemote control does not operate Select them with 0-9 number buttons Current input modeOne or some channels can’t be Displayed SectionLCD TV Specifications5944035790 Ver