Magnavox VRZ342AT99 Manual Clock Setting, Do each step within 60 seconds of the previous step

VRZ342comb.QX33 4/7/99 10:06 PM Page 15

There are two ways to set the clock. With manual clock setting, you tell the VCR the current time. With automatic clock setting, the VCR gets the current time from your local PBS station. It keeps track of the time by constantly referring to the time broad- casted by your PBS station.

If you are using a Cable Box or Direct Broadcast System, you must set the clock manually.

Follow the instructions under either manual clock setting or auto- matic clock setting (page 17) to set the VCR’s clock. Before you begin, make sure:

●The VCR is hooked up and turned on, and channels are pro- grammed into the VCR’s memory (see pages six - 12).

●The VCR is in VCR position. The VCR light will appear on the display panel. If it does not, press the VCR/TV button once.

Do each step within 60 seconds of the previous step.

Manual Clock Setting

1

Press the VCR button.

2

Press the MENU button.

SELECT op CHOOSE B

→PROGRAM VCR SET UP TUNER SET UP SET CLOCK REMOTE LOCATOR

TO END PUSH EXIT

3

Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.

SET CLOCK	[ON]
→AUTO CLOCK
SET MANUAL CLOCK	[ON]
DAYLIGHT SVG TIME
SET TIME ZONE
(AUTO)

TO CONTINUE PUSH MENU

SELECT op CHOOSE B

TO END PUSH EXIT

4

Press the PLAY/o button or the STOP/p button to select SET MANUAL CLOCK, then press the F.FWD/B button.

TIME – – : – –

DATE – – / – – / – –

TO END PUSH EXIT

Setting the Clock 15

			3-4
	POWER		EJECT
	VCR/TV		SPEED	MEMORY
	REC/OTR			PAUSE/STILL
			PLAY
	REW		F.FWD
2			STOP
	MENU	STATUS/EXIT		CLEAR
	1	2	3
	4	5	6	CH.
	7	8	9
1	MUTE	0	+100	VOL.
	VCR	TV	CBL/DBS
			VCR PLUS+
	VAR.SLOW		/ENTER	SLOW
	TRACKING		F.ADV	X2 PLAY
	QUICK	TIME	INDEX REC END	SKIP
			SEARCH

Helpful Hints

•To display the time, press the STA- TUS/EXIT button. A status display, which includes the time, will appear on the TV screen for about five sec- onds. For details, see “On-Screen Status Displays” on page 27.

•If you press the STATUS/EXIT but- ton while you are setting the clock, the TV screen will return to the pro- gram you were watching. If this happens, start over.

•Power failures that last for more than one minute can cause you to lose your clock setting if you set the clock manually. If this happens,

reset the clock.