Lindy SC, ST, VF-45, MT-RJ manual Specification, Led, Emi, Csma/Cd, Fcc A, Ce

SPECIFICATION

Standards

Protocol Forwarding Rate

Connector

Network cable

Wavelength

DIP Switch

MAC address

Buffer

Packet Size

LED

Dimension Operating Temp. Operating Humidity External Power Power consumption Weight

EMI

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-Tx Fast Ethernet

ANSI/IEEE 802.3 Auto-Negotiation

IEEE 8023.x Flow control on Half/Full Duplex

CSMA/CD

14880 PPS for 10Mbps

148800 PPS for 100Mbps One STP RJ-45 connector

One fiber connector: SC/ST/MT-RJ/VF-45

10BASE-T: 2-pairs UTP/STP Cat.3,4,5 cable

100BASE-TX: 2-pairs UTP/STP Cat.5 cable 100BASE-FX:Single mode fiber (8/125um, 9/125um)

multi-mode fiber (50/125um, 62.5/125um) Fiber Distance: Multi-mode fiber(2KM)

Single-Mode fiber (15/30/60 KM) Multi-mode: 850nm

Single-Mode: 1310nm

DIP Switch 1: UTP Auto-Nego/10Mbps Full Duplex mode

DIP Switch 2: Fiber Full/Half Duplex

DIP Switch 3: LLF(Link Lose Forwarding) Enable/Disable

DIP Switch 4: UTP LLF (for User Site)

Fiber LLF (for Central Site)

1K Mac address table with auto learning 1MB

64 to 1518 Bytes (No VLAN tag)

68 to 1522 Bytes (with VLAN tag)

Per port: Speed, Link/Activity, Full/Collision

Per Unit: Power

155mm x 72mm x 19mm( L x W x H) 0 to 45 (*!

10% to 90% ( Non-condensing)

Input: 100~240 VAC,50~60HZ; DC 5V @ 2.5A 4.2 Watts

307g

FCC A, CE