Trouble-Shooting
The Search Method
If your Television, Video Recorder or Satellite Receiver does not respond to the SUPER EASY after you have tried all the codes listed for your brand, try the Search Method. The Search Method may also work if your brand is not listed at all.
Let's say you cannot get your SUPER EASY to control your Television:
1
2
3
4
5
Switch your Television on.
Press the TV key on your SUPER EASY.
TV
Aim the SUPER EASY at your Television.
Press and hold down SETUP until the
SUPER EASY red light blinks twice. Then,
SETUP | press 9 9 1. The red light will blink | |||
9 | 9 | 1 | ||
twice. | ||||
| ||||
Now, alternate between TV and POWER, over and over, until your Television turns
TV off. You may have to press these keys many times, so please be patient. Remember to keep pointing the SUPER EASY at your Television when you press
POWER the POWER and TV keys.
When your Television turns off,
press SETUP. Don't forget, press SETUP
as soon as your Television turns off. Now
SETUP your SUPER EASY is ready to run your Television.
Note:
-To search for the code for your Video or Satellite follow the instructions above only press VCR or SAT during steps 2 and 4.
-If your Video's original remote control does not have a power key, press PLAY instead of POWER when searching for your code.
15