Memorex URC-3550 manual Menu Control, Original remote used Up, Down, Left, Right, Ch+

Page 11

Advanced Features

Menu Control

If your original remote had Menu control, your SUPER EASY will be able to control this feature. To use Menu, find the description below which describes how your original remote navigated through menu.

Original remote used Up, Down, Left, Right:

After pressing the Menu key on the SUPER EASY, the Volume and Channel keys can be used as directional keys. Use them the same way you did to navigate through the menu screen with your original remote control.

CH+

=

Up

CH-

=

Down

Vol+

=

Right

Vol-

=

Left

Original remote used Volume+/- and Channel+/-:

If you used the Volume and Channel keys on your original remote to navigate through Menu, you will need to press Menu twice, then the volume and channel keys will operate just as on your original remote.

Original remote used Red, Green, Yellow and Blue: On some devices Menu is activated by pressing one of the Fastext keys (red, green, yellow or blue). The SUPER EASY will access menu in the same way. To navigate through the menu screens, use the same keys as you did on your original remote control.

Important notes:

-To exit out of Menu, simply press the Menu key again or the key you were required to press on your original remote.

-During Menu operation, the red LED will blink every 3 seconds indicating the ONE FOR ALL is in Menu control. In this state the volume +/- and channel +/- are not accessible.

-Menu will cancel automatically if a key is not pressed within 20 seconds.

-If your orginal remote required you to press an “Ok” or “Enter” key, this function can be found under the Mute key during Menu control.

-For a more detailed explanation of Menu, please refer to the manual of your device. Remember not all devices operate menu in the same way.

12

Image 11
Contents URC-3550 Retain For Future ReferenceTable of Contents About Your Super Easy LED Keypad Teletext Keys Key Function Video Recorder KeysInstalling the Batteries Setup Setting Up The Super EasySetting Up Your Device To Change Press Advanced FeaturesHold down the Setup key until the red light blinks twice Changing the Device KeysText Symbol Title DescriptionTeletext and Fastext CH+ Original remote used Volume+/- and Channel+Menu Control Original remote used Up, Down, Left, RightProgramme for brightness down Colour & BrightnessPreventing Accidental Code Changes Punch ThroughSearch Method Trouble-ShootingPress and hold down Setup until Code Blink Out Press and hold Setup until the SuperHelpful Hints Problem SolutionConsumer Help-Line Quick Code Reference Set-Up Codes TV HCM GBCGEC GPMRFT MTCNEC NEITEC Set-Up Codes VCRSEI ITV ESCSet-Up Codes SAT EIF DDCDNR DNTStvi Set-Up Codes CABURC-3550 700475 UK GuaranteeNothing in this Guarantee Affects Your Statutory Rights