Memorex MLT1522 manual VCR Connections, Connection Using Coaxial Cable, Faq

Page 11

VCR CONNECTIONS

CONNECTION USING COAXIAL CABLE:

Follow the instructions below to connect a VCR to your television using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)

REAR OF TV

VCR

INCOMING CATV CABLE

 

From VCR OUT jack

1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.

2.Connect a 75 ohm coaxial cable from the VCR’s 75 Ohm OUT jack to the ANT jack on the rear of the TV.

3.Press the TV/VIDEO button until a channel appears on the TV screen and press PLAY on the VCR to watch a tape.

CONNECTION USING AUDIO/VIDEO CABLES:

Follow the instructions below to connect a VCR to your television using Audio/Video cables. (CABLES NOT INCLUDED.)

1.

Connect the cable, satellite or incoming

 

antenna to the VHF/UHF IN jack on the

 

rear of the VCR.

2.

Connect the left and right audio cable from

 

the VCR’s Audio OUT jacks to the TV’s

 

audio left and right AUDIO IN jacks.

 

Connect the VCR’s video OUT jack to the

 

TV’s VIDEO IN jack.

3.

Press the TV/VIDEO button until AV

 

appears on the TV screen and press PLAY

 

on the VCR to watch a tape.

FAQ:

 

My VCR has only 1 Audio jack, but this TV has two Audio input jacks, how do I connect it?

Simply connect it to the “L (Mono)” Audio input jack, but the sound will be monaural.

10

Image 11
Contents User’s Guide Contents Surge Protectors Important Safety InstructionsFCC Notice FCC WarningPOWER-CORD Protection CleaningAccessories Power SourcesDamage Requiring Service Power LinesReplacement Parts Safety CheckFront Power SourceLocation of Controls Remote Rear PanelBattery Precautions Remote ControlBattery Installation Effective Distance of the Remote Control TransmitterCable CATV/SATELLITE Connections For Subscribers to Basic Cable TV ServiceFor Subscribers to Scrambled Cable TV Service or Satellite FaqsOutdoor Antenna Connections VCR Connections Connection Using Coaxial CableConnection Using AUDIO/VIDEO Cables FAQDVD Connections Connection Using S-VIDEO CableConnection Using VGA to Component Cable Computer Connection Viewing Angle AdjustmentSetting the Video Setting the MenuTurning the Main Power on Image Setup Audio Setup On the Next Setting the Menu PC Setup Must be SET to PC ModePC Setup How many channels will I actually receive? Setting the System and Setting the Channels Into MemoryAdding and Skipping Channels TV Operation TV/VIDEO Sleep TimerMute JumpEarphone InfoTo View Closed Captions What is Closed CAPTIONING?Closed Captions Closed Captioning with a VCRChip SET-UP Setting V-CHIPNC17 Mpaa Rating SET-UPTV Rating Class Option SET-UP Changing the Password TV Broadcast Reception Troubleshooting GuideSymptom Possible Cause Possible Solution Power Remote ControlReception Disturbances Specifications Care and Maintenance Memcorp, Inc Weston, FL