TV Operation

Press the POWER button 1 to turn on the TV; the POWER indicator will light orange. Press the TV/VIDEO button 2 repeatedly to select the TV mode.

Adjust the volume level by pressing the VOLUME UP/Navigation Right 1 or VOLUME DOWN/Navigation Left 2 button. The volume level will be indicated on the screen by a green bar.

NOTES:

• When AIR/CATV is set to AIR, only channels up to 69 can be selected. When set to CATV, channels up to 125 can be selected.

• If an invalid channel is selected, the display will revert to the original channel.

OPTIONS

AirTV: If using a

VHF/UHF

antenna.

CATV: If using Cable

TV.

Set the AirTV/CATV (CABLE) option and set the channels into memory as described on pages 19 and 20.

For proper operation, before selecting channels, they must be set into the TV’s program memory, see page 19-20. Press and release the CHANNEL/Navigation UP 1 or DOWN 2 button. The TV automatically stops at the next channel set into memory. This will not operate if channels are not set into memory.

Direct Program Selection buttons (0-9) 3.

Use these buttons to select a channel. The channel number will appear at the top right corner of the screen.

• For Channels 01 through 99, press the two digits in order.

• For Channels 100 through 125, press the 1-- button 4, then the remaining two digits.

FAQs:

Why do I only receive 69 channels, when my cable goes much higher? TV SETUP option must be set to CATV when using cable, see page 19.

Why are some channels scrambled?

You must subscribe to these channels through your cable company.