Motorola VIP1216, VIP1200 installation manual Troubleshooting

3 TROUBLESHOOTING

There is no	Verify that the Mute button on the remote control has not
audio when	been pressed. Press Mute on the remote control to
viewing TV	restore sound.
channels.	Verify that the set-top box audio output is connected to
	the TV or home theater receiver.
	If the set-top box audio output is connected to the TV,
	verify that the Mute button on the TV has not been
	pressed.
	If the set-top box audio output is connected to a home
	theater receiver, verify that the home theater receiver is
	set to the appropriate input source and its Mute button
	has not been pressed.
	Verify that you have the correct cables for the audio ports.
	Verify that the audio cables are firmly connected between
	the set-top box and the audio playback device (TV, home
	theater receiver, etc.).
There is no	Not all Dolby Digital programs feature full 5.1 Surround
audio from the	Sound. In some cases, the programs may only contain left
center and/or	and right stereo audio.
surround	Verify that the S/PDIF cable is firmly connected to the set-
speakers of a
	top box and the home theater receiver.
home theater
	Verify that the home theater receiver is set to a surround
receiver
	sound audio mode (Dolby Digital, Dolby Pro Logic® II,
connected to
	Dolby Pro Logic).
the set-top
	Verify that the home theater receiver is properly
box.
	configured to work with all connected speakers.

The set-top box is making

ahumming noise.

The set-top box includes an integrated hard drive and a fan for cooling. During normal operation, it emits a low humming noise, similar to a personal computer. The noise varies in volume occasionally when the speed of the internal fan adjusts to changes in the temperature around the set-top box. Please note the hard drive will stay on even when the set-top box is turned off.

16