MKS5620.O/M.QXD 7/2/03 9:15 AM Page 16
OPERATION (CONTINUED)
When watching a CD+G on the monitor screen, adjust the brightness,
|
| BRIGHTNESS | CONTRAST | |
|
|
|
|
|
|
|
|
|
|
If the picture moves up and down or rolls, rotate to adjust the vertical hold.
If the picture is too light or too dark, rotate to adjust the brightness.
If the picture is too strong or too weak, rotate to adjust the contrast and clearly define the shades of blacks, grays and whites.
CARE AND MAINTENANCE
Caring for Compact Discs
•Treat the compact disc carefully. Handle the compact disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the compact disc.
•Do not attach adhesive tape, stickers, etc. to the compact disc label.
•Clean the compact disc periodically with a soft,
cleaning kit.
• If a compact disc skips or gets stuck on a section of the compact disc, it is probably dirty or damaged (scratched).
•When cleaning the compact disc, wipe in straight linesBENZENE C from the center of the compact disc to the outer edge
of the disc. Never wipe in circular motions.
•This unit is designed to play only compact discs bearing the identification logo as shown here. Other discs may not conform to the CD standard and may not play properly.
•Compact Discs should be stored in their cases after each use to avoid damage.
•Do not expose compact discs to direct sunlight, high humidity, high temperatures, or dust, etc. Prolonged exposure or extreme temperatures can warp the compact disc.
•Do not stick or write anything on either side of the compact disc. Sharp writing instruments, or the damage the surface.
LEANER
ink may
16