Linksys EG0801W manual Package Contents, 10/100/1000 Workgroup GigaSwitch’s Rear Panel

Page 4

Instant Gigabit Series

EtherFast® 10/100/1000 8+1 Workgroup GigaSwitch

 

 

 

Package Contents

One 10/100/1000 8+1 Workgroup Gigaswitch®

One AC Power Adapter

One Stacking/Wall Mounting Module

One User Guide and Registration Card

Getting to Know the EtherFast® 10/100/1000 Workgroup GigaSwitch

The 10/100/1000 Workgroup GigaSwitch’s Rear Panel

The Workgroup GigaSwitch’s Ports

GigaSwitch

The GigaSwitch port is used to connect to the PC

 

into which you have installed an Instant Gigabit

 

Network Adapter. Or, it can be used to expand your

 

network by connecting to a 1000Mbps hub or

 

switch, which is done by simply running a Category

 

5e crossover cable from the GigaSwitch port to the

 

uplink port on the 1000Mbps hub or switch. When

 

connecting to an Instant Gigabit Network Adapter,

 

just plug one end of a Category 5e crossover cable

 

into the RJ-45 port on the Adapter and the other end

 

into the GigaSwitch port on the GigaSwitch.

Ports 1-8

These eight LAN (Local Area Network) ports con-

 

nect to network devices, such as PCs, print servers,

 

network attached storage, and remote hard drives at

 

10/100Mbps.

Power

The Power port is where you will connect the

 

power adapter.

2

3

Image 4
Contents EtherFast 10/100/1000 +1 Workgroup GigaSwitch Copyright & Trademarks Contents IntroductionPackage Contents 10/100/1000 Workgroup GigaSwitch’s Rear Panel10/100/1000 Workgroup GigaSwitch’s Front Panel Switches Versus HubsPlanning Your Network OverviewInstalling The Workgroup Gigaswitch Connecting Computers To Your SwitchConnecting Your Hardware Together and Booting Up Tips on Switching Your NetworkGlossary Instant Gigabit Series Warranty Information SpecificationsEnvironmental Contact Information T p / / w w w. l i n k s y s . c o m
Related manuals
Manual 12 pages 53.18 Kb