Memorex E-IDE software manual Copy a Disc

Page 20

7.4. Copy a Disc

Unless you own the copyright or have the permission of the copyright holder, the unauthorized copying of discs represents a violation of national or international laws and may result in serious penalties.

1. Start Nero StartSmart; select the "Copy and Backup" category and click on "Copy Disc."

NeroVision Express 2 starts automatically and the selection window for the drives and the final burning settings opens up.

2.Select the drive containing the disc to be copied as the source drive.

3.Select the Memorex Double-Layer DVD recorder to copy the disc.

4.In the "Quick Copy" section, you can determine how the disc is to be copied.

If the Quick Copy option is selected, the copy is made directly, i.e., from drive to drive. This method is quick but is susceptible to errors.

If the Quick Copy option is not selected, a temporary image file for the original disc is first recorded on the hard drive, and the image file is then burned from the temporary image file. This method takes longer; and the size of the image file,

and therefore the required hard disc space, corresponds to the quantity of data to be copied from the original disc.

In addition, you can also make the following settings:

Writing Speed Select the speed for the burning process.

Number of copies Select the number of copies to be burned.

5. Once you have made all your settings, click on the "Burn" button to start burning the disc.

The burning process starts and you will see information about the current status.

Once the burning process is complete, you can print or save a log of the burning process.

6.Click on the "Next" button to advance to the selection window.

38

39

Image 20
Contents 16x FCC Information U.S.A Table of Contents Introduction CongratulationsAbout your new Memorex DVD Recorder About Double-Layer RecordingTools Required for installation Hardware InstallationSetup Flowchart About the E-IDE Atapi InterfacePhysical Installation of Your NEW DVD Recorder Master Leave the jumper switch on the Master position ifSlave Change the jumper to the Slave position if Cable.10Analog Connection Not IncludedReconnect the computer to the AC outlet and power it up If so, you may skip to . If not, please proceed to stepSome pressure to completely secure them in place Process describedOperating Your NEW Drive Front PanelLoading a Disc Ejecting a DiscIncluded Software Creating CDS and Dvds Using Nero StartSmart-the Command Center User Interface and Navigation 6.4.1 Standard viewNero StartSmart bar Clicking on this button closes Nero StartSmartStandard mode Expert modeStandard mode Expert mode Navigation in Nero StartSmartAssigning programs Nero ProductCenterBurning DISCS-THE Basics Make a Data DiscCurrent Recorder Disc nameWriting Speed Number of copiesMake an Audio Disc Click on the Next button to advance to the selection window Make a Video Disc Volume Name Burn toWrite to Hard Disc FolderCopy a Disc Upgrade Options Updates free downloads FAQ Software Related Troubleshooting Disc tray does not open when you press the eject buttonDrive is not recognized Drive is not recognized by the operating systemDrive does not power up No data can be read from a discPlayback of an audio CD CD-DA is inaudible Drive does not operate correctlyAppendix About the FirmwareSafety Precautions About CD/DVD discs Copyright 2004 Memorex Products, Inc. Cerritos, CA 5395