Magnavox VRA641AT99 On-Screen Status Displays, If on Screen Mode is set to on or Counter

Page 25

On-Screen Status Displays 25

An on-screen status display, which includes the current VCR operation and other information (see illustration), will appear when you press the EXIT/STATUS button or certain function buttons. The contents of the status display will vary.

ON SCREEN MODE ON:

Whenever you press the PLAY 8 button or the STOP 9 button to stop playback, some of the contents of the status display will appear for five seconds.

ON SCREEN MODE COUNTER:

The real-time counter will appear on the screen during normal tape playback and when playback is stopped. Whenever you press the PLAY 8 button or the STOP 9 button to stop playback, some of the contents of the status display will appear for five seconds. After five seconds, only the counter will remain on the screen.

ON SCREEN MODE OFF:

No status display will appear when you press function buttons or the EXIT/STATUS button.

To select a status display mode, follow these steps.

1

Press the VCR button, then press the MENU button.

SELECT , 9 CHOOSE >/OK

Sound program available

Channel

Current VCR

operationTime

STOP

 

 

 

12:00 PM

STEREO

 

 

 

CH. 12

 

 

 

SAP

 

 

 

 

 

 

 

 

SHARP

 

 

 

 

 

 

REMAINING

TIME

0:59

 

 

 

 

SLP

0:00:00 HIFI

 

 

 

 

 

 

Tape

 

Sound program

speed

 

selected

 

 

 

 

 

 

 

 

Real-time counter

Tape time remaining

SmartPicture setting

VCR SET UP TUNER SET UP INITIAL SET UP

TO END PUSH EXIT

2

Press the PLAY 8 or STOP 9 button to select VCR SET UP, then press the FF :/OK button.

SELECT , 9

CHOOSE >/OK

→ ON SCREEN MODE

ON

BLUE BACKGROUND

ON

TIMER REC SPEED

MANUAL

VIDEO STABILIZER

OFF

AUDIO OUT

 

HIFI

STEREO/SAP

 

STEREO

TO END PUSH EXIT

3

Press the PLAY 8 or STOP 9 button to select ON

SCREEN MODE, if necessary.

4

Press the FF :/OK button repeatedly so that ON,

COUNTER, or OFF appears beside ON SCREEN MODE.

5

Press the EXIT/STATUS button.

Helpful Hints

If ON SCREEN MODE is set to ON or COUNTER:

You may bring up the status display at any time by pressing the EXIT/STATUS button. (The exception is during Slow, Search, or Still mode.) The display will appear for about five seconds.

Channel numbers (when tuned) will appear for a few seconds.

When tape playback is stopped, press the EXIT/STATUS button repeatedly to see the current time, real-time counter, or current channel number on the display panel. During tape playback, press the EXIT/STATUS button repeatedly to see the current time or real-time counter on the display panel. The channel will not appear.

Depending on the type of tape used, the tape time remaining may not appear right away, or may not be correct. Also, “– – :–” may appear, or the display may flash.

Image 25
Contents VRA641AT For Customer Use Dear Philips Magnavox product ownerSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups without a Cable BoxCH3 CH4 Hookups without a Cable Box cont’dConnections Hookups with a Cable Box/Direct Broadcast SystemRecording/Viewing Any Channel Recording One Channel/Watching Another Cable signal RF coaxialWith this connection 2Cable Box/DBSTurn on the TV Wait for the VCR to set up channels Press the VCR button, then press the Power buttonTurning on Your VCR Press the FF /OK button. The menu shown below will appearPress the VCR button, then press the Menu button Automatic Channel SetupPress the Play 8 or Stop 9 button to select Adding/Deleting ChannelsADD/DELETE CH., then press the FF /OK button Instructions continue on Manual Clock SettingTo make corrections, follow steps ButtonWhen the month and day are correct, press the FF /OK Setting the Clock cont’dPress the Play 8 or Stop 9 button repeatedly to set ButtonPress the FF /OK button repeatedly to select Time Time Zone SelectionManual PBS Channel Selection Press the FF /OK button repeatedly to select PBS CH Automatic PBS Channel SelectionDaylight-Savings Time Press the Stop 9 button or Play 8 button to select Language SelectionRemote Control Buttons VCR/TV Button Timer ButtonSpeed Button EXIT/STATUS ButtonDisplay Panel STILL/PAUSE Button REWind Button STOP/EJECT Button FF Fast Forward ButtonFront VIDEO/AUDIO OK Button Play Button Jacks MENU/EXIT ButtonRear Panel On-Screen Status Displays If on Screen Mode is set to on or CounterTV Codes Setting the Remote Control to Operate a TVSetting the Remote Control to Operate a Cable Box/DBS Playing Sqpb does not deliver Super VHS resolutionIf playback does not start automatically, press the Play Recording VCR records in a preset volumePress the VCR button One-Touch Recording Channels are set up. Details are on pagesStarting an OTR Use the CHannel 8/9 button or the Number buttons toIf you use a Cable Box/DBS, you VCR light will disappear from the display panelChannels Setting Up the VCR Plus+ Programming SystemCall Letters Examine the lists 2on Setting Up the VCR Plus+ Programming System cont’dTimer Recording with the VCR Plus+ Programming System FF /OK button Channels are programmed. Details are on pages Quick ProgrammingTape Speeds Cassette type / Playback TimeHrs Will play tapes recorded in LP, but LP will notIf you forget to turn off the VCR Same length of time every weekMessage, press the Clear button To see the programmed timer recordings individually Checking, Editing, or Clearing Timer RecordingsQuick Programming cont’d Indicates a Daily recordingFollow the steps below to set Timer REC Speed to Auto Timer Recording Speed SettingVCR 1 will play your tape. Insert a prerecorded tape in VCR Rerecording Tape DuplicationAudio and video cables are not included Index Search Receiving a Stereo Broadcast Multi-Channel Television Sound SystemReceiving a Second Audio Program Press the RECord/OTR button to start recording Multi-Channel Television Sound System cont’dHi-Fi Stereo Tape Playback Video Stabilizer SmartPicture Natural This is generally the preferred settingForward and Reverse Searching Playback OptionsViewing a Still Picture Viewing a Slow Motion PictureDash will appear on the display panel When Child Lock is activatedBlue Background Automatic Operation Features Cable Box/DBS Output Channel channel 03 or GlossarySpecifications Helpful Hints Helpful Hints cont’d Renewed Index Page Page Supplied Accessories