11 Advanced Setup
Press SETUP on the remote control to access your player’s ad- vanced setup menu. You can access this menu to modify the set- tings selected during the Quick Setup process as well as many additional options explained in this section. Please note that some menu items may not be available, depending on the physical con- figuration of your player. To exit or
Regional Settings
Setup menu
Language
DVD Subtitle Language
DVD Audio Language
DVD Menu Language
Change Codepage
Language: Enter this menu item to set your preferred language for all of the player’s menus.
DVD Subtitle Language: Enter this menu item to set your pre- ferred default subtitle language in DVDs. Please be advised that not all DVDs respect this setting.
DVD Audio Language: Enter this menu item to set your preferred default spoken language in DVDs. Please be advised that not all DVDs respect this setting.
DVD Menu Language: Enter this menu item to set your preferred default language in DVD menus. Please be advised that not all DVDs respect this setting.
Change Code Page: If your selected Subtitle Language needs support for special characters, you can configure this support by selecting from the list of codes that support your language.
Video Settings
Setup menu
Display Connection | SCART RGB |
TV System | NTSC/60Hz |
Video Mode |
|
Screen Format | 16:9 automatic |
HDMI Auto Sence | yes |
Display connection: Enter this menu item to set up your video connection. Please select the video cable type that you are us- ing to connect your player to your TV. Note that each cable type carries signals in a different way, so selecting a different cable other than the one physically connected to your player may result in picture loss. If this happens, please do not press any buttons on the remote control and wait 15 seconds. The player will then automatically return to the previous selection.
TV System: Enter this menu item to switch between TV Systems. You can select PAL/50Hz or NTSC/60Hz. PAL is the system most commonly used in Europe, while NTSC is used in the US and Japan. While most American TVs only support NTSC, nowadays most European TVs support both standards. If you are not sure which format to use, we recommend that you try PAL/50Hz and change it if it is incorrect.
Video Mode: Enter this menu item to switch between standard definition and high definition video output. High definition output is only available for TV’s that support it, and is connected to the player via an HDMI or Component Cable.
Note: In order to upscale content like
TV supports high definition and HDCP, please consult its User Guide or manufacturer.
Screen Format: Enter this menu item to select the format in which you wish your DVD content and video to be displayed on your TV. If you are using a widescreen 16:9 format TV with your player, 16:9 WIDESCREEN is the recommended setting for watching DVD’s and other video content in their correct aspect whilst making full use of the screen for widescreen content. If you are using a conventional 4:3 format TV with your player, se- lect LETTERBOX to obtain the full view of widescreen content, or PAN&SCAN for a cropped view of the image filling up the entire screen while sacrificing some of the picture.
HDMI Auto Sense: Enter this menu to select whether you would like your KiSS 1600 to automatically switch to the HDMI Output as soon as an HDMI Cable is inserted in the connector and the TV/AV Receiver is powered ON.
Audio Settings
Setup menu
Audio Mode | Stereo |
WMAPro 5.1 Decoding |
|
Disable Volume Control | yes |
Audio mode: Enter this option to select between STEREO and SURROUND speaker setup for your system. If you select STEREO, SURROUND media playback will be mixed to 2 channel Stereo output for TV or
EN
19