REMOTE CONTROL
BATTERY INSTALLATION
1.Remove the Battery Compartment by pressing in on the tab and then sliding the compartment out.
2.Install a CR2025 battery, paying attention to the polarity diagram in the battery compartment (positive side up).
3.Replace the Battery Compartment.
BATTERY PRECAUTIONS
Follow these precautions when using a battery in this device:
1. Use only the size and type of battery specified.
2. Be sure to follow the correct polarity when installing the battery as indicated next to the battery compartment. A reversed battery may cause damage to the device.
3. If the device is not to be used for a long period of time, remove the battery to prevent damage or injury from possible battery leakage.
4. Do not try to recharge a battery not intended to be recharged; it can overheat and rupture. (Follow battery manufacturer’s directions.)
EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER
1 4 7 0
2 5
+10 | 8 |
3 6 9
| 1 |
4 |
|
7 | 2 |
0 | 5 |
8 | 3 |
+10 | 6 |
| 9 |
| 1 |
| 2 |
4 | 3 |
| 5 |
7 | 6 |
| 8 |
0 | 9 |
| +10 |
NOTES:
• When there is an obstacle between the DVD and the transmitter, the transmitter may not operate.
• When direct sunlight, an
incandescent lamp, fluorescent lamp or any other strong light shines on the Remote Sensor of the DVD, the remote operation may be unstable.
11