DVD OPERATION
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Slide the Power switch to the ON position on the main unit to turn on the unit.
• “INVALID KEY” will appear on the screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not explained in this owner’s manual.
• If the unit is in Stop mode, Pause mode or if there is no disc in the disc tray, the screen saver will appear on the screen after five minutes.
PLAYBACK OF A DVD
1 2
Slide the POWER switch (on the main unit) | Press the OPEN button to open the disc |
to the ON position to turn the unit on. If the | tray, “OPEN” will appear on the screen. |
unit is in Standby mode (the ON/STANDBY | Insert a disc with the label side facing up in |
indicator is red), press the POWER | the disc tray. |
ON/STANDBY button (on the remote) to |
|
turn the unit on. |
|
CONTINUED ON THE NEXT PAGE
24