TROUBLESHOOTING GUIDE
Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS | POSSIBLE SOLUTIONS |
|
|
|
|
| • Make sure the power cord is plugged in. |
|
TV does not | • Try another AC outlet. |
|
operate. | • Power is off, check fuse or circuit breaker. |
|
| • Unplug unit for an hour, then plug it back in. |
|
|
|
|
| • Station or CATV experiencing problems, |
|
Poor sound | tune to another station. |
|
• Check sound adjustments (Volume and Muting). |
| |
or No sound. |
| |
• Check for sources of possible interference. |
| |
|
|
|
| • Station or CATV experiencing problems, |
|
| tune to another station. |
|
Poor picture | • Make sure channels are set into memory. |
|
• Check antenna or CATV connections, adjust |
| |
or No picture. |
| |
| antenna. |
|
| • Check for sources of possible interference. |
|
| • Check picture control adjustments. |
|
| • Station or CATV experiencing problems, |
|
Poor | tune to another station. |
|
reception on | • Make sure channels are set into memory. |
|
some | • Station is weak, adjust antenna to receive |
|
channels. | desired station. |
|
| • Check for sources of possible interference. |
|
|
|
|
| • Station or CATV experiencing problems, |
|
| tune to another station. |
|
Poor color or | • Make sure channels are set into memory. |
|
• Check picture control adjustments. |
| |
no color. | • Check antenna or CATV connections, adjust |
|
|
| |
| antenna. |
|
| • Check for sources of possible interference. |
|
| • Station or CATV experiencing problems, |
|
Picture | tune to another station. |
|
wobbles or | • Make sure channels are set into memory. |
|
drifts. | • CATV company is scrambling signal. |
|
| • Adjust antenna. |
|
|
|
|
SYMPTOMS | POSSIBLE SOLUTIONS | ||
| • Check all CATV connections. | ||
No CATV | • Set TV/CATV menu option to the CATV mode. | ||
reception. | • Station or CATV system problems, try | ||
| another station. | ||
|
|
| |
Horizontal or | • Check antenna connections, adjust or | ||
diagonal bars | |||
on screen. | • Check for sources of possible interference. | ||
|
|
| |
No reception | • Make sure TV/CATV menu option is in the | ||
above | appropriate mode. | ||
channel 13. | • If using antenna, check UHF antenna connections. | ||
|
|
| |
| • Batteries are weak, dead or inserted incorrectly. | ||
| • Remote is out of range, move closer to TV | ||
No Remote | (within 15 feet). | ||
• Make sure Remote is aimed at sensor. | |||
operation. | |||
• Confirm there are no obstructions between | |||
| |||
| the Remote and the TV. | ||
| • Make sure the power cord is plugged in. | ||
|
| ||
No reception. | • Reset your password. |
•No broadcast on station tuned.
TV shuts off. • Sleep Timer is set.
•Power interrupted.
•TV station experiencing problems or program
Closed - | tuned is not closed captioned. Try another channel. | |
• Check CATV connection or VHF/UHF | ||
Caption is | ||
antenna, reposition or rotate antenna. | ||
not activated. | ||
• Press TV/CAP/TEXT button to turn on the | ||
| closed caption decoder. | |
|
| |
Display is not |
| |
shown in your | • Select proper language in the menu options. | |
language. |
|
ENGLISH
DEGAUSSING SYSTEM
This television has a degaussing circuit that will clear up color distortions on the TV screen that are caused by any excess magnetism which happens to get too close to the TV. This circuit is designed to operate once when the set is first plugged in. If minor color distortions are seen in some locations on the screen, please unplug the TV for approximately 15 minutes. When the TV is plugged back in, the degaussing circuit will operate once to clear up any color distortions. Repeat this procedure any time the TV screen is accidentally magnetized, or when the TV is moved or relocated.
SPECIFICATIONS
AC Power Input: | 120V, 60Hz |
AC Power Consumption: | 125 Watts |
Chassis Construction: | IC Solid state |
Picture Tube: | 27" (measured diagonally) |
Horizontal resolution: | 260 lines |
Audio Power Output Rating: | 2.5 + 2.5 Watts |
Speaker: | 2" x |
Tuner Type: | 181 Channel, Quartz PLL |
| Frequency Synthesized |
Remote Control: | Infrared, Direct Access, 2 x AAA |
| batteries (not supplied) |
ACCESSORY
Remote Control
Receiving Channels: | VHF | |
| UHF | |
| CATV | |
|
| |
|
| |
|
| |
|
| |
|
| |
Antenna Input Impedance: | 75 Ohm (VHF/UHF/CATV) | |
| Coaxial Input | |
Input/Output: | ||
|
| |
| Video: | In (RCA) |
|
| Out (RCA) |
| Audio: | In (RCA) |
|
| Out (RCA) |
Dimensions: | ||
Weight: | 80.5 Ibs |
11
11 | 27/4/04, 14:05 |