Marantz HD6400W warranty LCD Remote Description of Controls and Operation, Operations

LCD REMOTE DESCRIPTION OF CONTROLS AND OPERATION

LCD REMOTE

INTELLIGENT REMOTE

Your remote is a LCD touchscreen univer-

sal, learn remote that combines flexibility of use with maximum adaptability. Set to auto- matically work with your Marantz HD6400W DPTV and all its integrated Menu system features, the remote also has preset “Device” operations for a variety of Audio and Video accessory prod- ucts (such as VCR, DVD, CD, Tape, etc.)

Although the remote’s preprogrammed operat- ing codes (RC5/6) were set to work with

BEGIN

1 To install the four	2
	Insert (4-AA) batteries
supplied AA batteries:	into the battery compartment.
Slide the battery cover off the	Be sure the (+) and (-) ends of
	the batteries line up correctly
back of the remote.
	(inside of case is marked.)
	Battery Compartment

Battery Cover

- Battery Life Note -

• Use only AA alkaline or lithium batteries for best results.
•	Never mix worn and fresh batteries.
•	When battery power is running low a Low Battery icon blinks at
	the top of the remote LCD display.
•	Certain features may continue to operate when battery power is
	low, but you won’t be able to use the remote’s learn or customizing

3Reattach the battery cover when completed. The remote should now be ready for

use.

STOP

BATTERY RECHARGING

An optional recharging

dock and rechargeable bat- tery pack are also available for the remote.

A light on the front of the Battery Dock will indicate when the batteries are fully charged. Depending upon the condition of the battery pack a complete recharge could take 2-3 hours.

Rechargeable Battery Pack and Dock

features.

Recharging Contacts

Marantz and Philips branded products, other manufacturer’s equip- ment can easily be con- trolled through the remote’s “Learn” mode capability. Even the remote’s keypress but- tons and Device select list can be customized or rearranged to better match the order and commands for your spe- cific in-home electron- ics.

The remote can also memorize select key but- ton sequences in order to automate, or “short- cut”, a feature function

CONTROLS

Light Sensor

IR Transmitter

(Sending Eye)

LCD Touchscreen

- Direct Access Buttons -

•The Mute, Channel (+,-), and Volume (+,-) buttons will operate even when the LCD touchscreen is off. They can also be programmed to operate a dedicated component, such as the DPTV, or different devices at different times.

Learning Eye

- Left/Right Buttons -

Side View

Contrast Dial (+,-)

Backlight Button

Serial Port (for future upgrades)

selection or process. Once created and placed in memory the recorded “macros” will execute

•Function of the Left and Right buttons change depend- ing on the device the remote is controlling.

•The LCD touchscreen display will show the Left and Right buttons current control function labels.

the desired commands to the various compo- nents in order to com- plete, for example, a VCR movie playback on the DPTV or other simi- lar procedure.

Due to the amount of optional components available within the remote’s Device Reference and Learn Code Lists, please refer to the separate full-use Remote Control

OPERATIONS

BEGIN

1To turn the remote display screen ON, touch the screen with your finger, then let go.

Pressing the Backlight button

(on the left side of the remote)

also turns the display ON.

Turn the Contrast dial (on the

left side of the remote) to

adjust the screen’s brightness.

TOUCHSCREEN USE/CARE

•Tap the touchscreen gently when using the remote. Never use force.

•Do not use pens, or any sharp object to tap the screen. You might damage the surface.

•Keep the touchscreen dry. Wipe off any spills immediately. Never immerse the remote in water or any liquid.

•Do not drop the remote on hard surfaces (or drop anything on the LCD touchscreen itself.)

•Do not expose the remote to extreme temperatures.

•Clean the touchscreen with a soft cloth (dampened slightly if needed.) Never use abrasives or cleaning solutions.

Owner’s Manual for complete details on its functions and opera- tions.

2

The remote will display

the last device screen used (or

the Home screen for all of the

devices the remote is set to

operate.)

Press the Home button

at any time to return to the

remote’s components menu list.

	TV
DTV	VCR
Pre Amp	Tuner
CD	DBS
LD	DVD
Tape	CDR
1/1 INFO	A/CH
Home Screen		Control Panel

Press the button for the

desired device to display a

control panel screen for the

device.

3A Device menu can also be used to select components from a currently opened con- trol screen.

Press the Device

tab on the touch-

screen and a Device

list will appear. Just

tap the name of the

device you want to operate.

You can also scroll the Device

list by pressing the Arrow but-

ton to move down or

up the list.

4Press a button on the control panel to send a remote command to the selected

“active” device.

Use the scroll

arrows

to move to the next

(or previous) page

of controls. The touchscreen

will display the current control

screen’s page number, and the

total number of pages available

for the device (1/8; 2/8; etc.)

5The remote is ready to

send device commands when

the remote icon is shown (at the center top of the touch-

screen display.)

If another mode label is cover-

ing the remote icon, such as

or , the mode

will need to be reselected.

Tap the Mode
button on the touch-
screen, and reselect
the	mode to
return the remote to
its normal operating mode.
	STOP

3