RC9001 User Guide
1Connect the Control Panel (or the docking station) to the PC with the USB cable.
2Place the original remote 4 to 6 inches
Check if both the batteries are sufficiently charged.
3Press and hold the key of the original remote for more than 1 second.
Tip With the Control Panel connected to the PC, you can test newly added codes via the editor. You press the Test IR button and the code will be sent to the A/V equipment.
To assign codes to the buttons in the code pages:
1In the Tools menu, select My Database Quick Access.
2Select the code from the list,
5Configure the Extenders used in the 
RC9001 System.
Tip When you are not using an Extender in the configuration file, you need to disable the Wireless Settings in the System Properties.
1Select the number of Extenders in the System Properties on the tab Extenders and define the type.
2Select the way the Control Panel will work together with the Extenders in the System Properties on the tab Wireless Settings
Note The WiFi time out can be set from 15 minutes to 24 hours, depending on the preference of the customer to optimize battery saving and response time when a button is pressed.
3Match each Extender to the device(s) by selecting the Extender in the Device Properties on the Settings tab.
Note When the Extenders are used in a network, you need to configure the extenders with the Extender Configuration Tool. For more information, please refer to the User Guides for the RX8001 and RX9001 Extenders.
6Configure the Settings for the Control Panel.
Set time & date and define the activation method, time outs and screen brightness in the System Properties of the configuration file on the Control Panel Settings tab.
Note On the Control Panel, you can still change a limited set of settings. To access the
Settings on the Control Panel, press and hold the Settings icon 
on the touch screen for 3 seconds.
ENGLISH
8