Exchanging discs during playback

Operation with DVD and Video CD

Playing a DVD and Video CD

Playback Setup DVD-V DVD-A VCD2.0 VCD1.1

Turn on the TV and select the video input source con- nected to the DVD player.

Audio system: Turn on the audio system and select the input source connected to the DVD player.

1Press OPEN/CLOSE to open the disc tray.

2 Load your chosen disc in the tray, with the playback side down.

Do not load a disc in the left and light side position.

Center position

•Discs can be loaded one at a time by pressing DISC SKIP to rotate the carousel.

3READING appears on the TV screen, and playback starts automatically. If playback does not start, press PLAY.

In some cases, the disc menu might appear instead.Press OPEN/CLOSE to close the tray.

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which offer a menu.

DVD-V

Use the 1 234 buttons to select the title/chapter you want to view, then press SELECT/ENTER to start play- back.

Press TOP MENU or MENU to return to the menu screen.

DVD-A

Use the 1 2 3 4 buttons to select an option you want, then press SELECT/ENTER to view the option.

VCD2.0

Use the number buttons to select the track you want to view.

Press RETURN to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on the each menu screen. You also may set PBC to Off under setup. See page 14.

Notes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Parental Control”, on page 15).

–DVDs may have a region code.

Your player will not play discs that have a region code different from your player. The region code for this player is 2 (two).

Press DISC EX-CHANGE on the front panel during playback to open the disc tray.

Press DISC SKIP to rotate the disc trays to the desired position. The carousel will rotate clockwise by one disc increments.

Exchange the discs and press DISC EX-CHANGE or OPEN/CLOSE to close the disc tray.

Note

–The disc tray presently loaded in the play position can not be exchanged.

Skipping discs

Press DISC SKIP during play or when playback is stopped.

Notes

–When DISC SKIP is pressed, the disc tray rotates and playback begins from the beginning of the next disc.

–If there is no disc on the next disc tray, the following disc tray will be selected.

–When DISC SKIP is pressed during playback of disc 5, playback of disc 1 will start.

Exchanging the disc and starting playback

1.Press OPEN/CLOSE during playback or when play- back is stopped.

Play stops (if pressed during playback), the disc tray opens and the disc that was in the play position comes to the front.

2.Exchange the disc.

3.Press OPEN/CLOSE or PLAY again.

The tray closes and playback begins (with the disc that was in front).