Before Operation (Continued)
Sound
Digital Audio Output
Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use.
DOLBY DIGITAL/PCM: Select “DOLBY DIGITAL/PCM” if you connected the DVD Player’s DIGITAL OUT jack to a Dolby Digital decoder (or an amplifier or other equip- ment with a Dolby Digital decoder).
Stream/PCM: Select “Stream/PCM” if you connected the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a DTS decoder, Dolby Digital decoder or MPEG decoder.
PCM: Select when connected to a
Disc Audio | DIGITALDOLBY /PCM |
Disc Subtitle | Stream/PCM |
Disc Menu | PCM |
Rating
Country Code
Sample Freq.
TV Aspect
48 KHz
Menu Language
96KHz
Progressive Scan
Digital Audio Output
5.1 Speaker Setup
Others
Sample Frequency
To change the Sample Frequency setting, first select the desired Digital Audio Output as indicated as above. If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them.
If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing.
5.1 Speaker settings DVD
Select speaker settings, including volume balance and delay time, or test the speaker settings.
Speaker settings are only active on the Analog Multi- Channel Output. (See “Speaker Settings”, page 27.)
Disc Audio
Disc Subtitle
|
| Disc Menu | R |
|
| R |
|
| Front L |
| |||
|
| Rating |
| |||
|
| Country Code | Volume | 0 dB | ||
|
|
| Size | Large | ||
|
| TV Aspect | ||||
|
| Menu Language | Distance | 1 ft | ||
|
| |||||
|
| Progressive Scan | Test |
| ||
|
| Digital Audio Output | Return |
| ||
|
| 5.1 Speaker Setup |
|
|
|
|
|
|
|
|
|
|
|
|
| Others |
|
|
|
|
Others
The DRC, Vocal, PBC and Auto Play settings can be changed.
Press 3/4 to select the desired item and press SELECT/ENTER. The setting of the selected item is changed between On and Off.
|
| Disc Audio | DRC | On |
|
| Disc Subtitle | Vocal | On |
|
| Disc Menu | PBC | On |
|
| Rating | Auto Play | Off |
|
| Country Code |
|
|
|
|
|
|
|
|
| TV Aspect |
|
|
|
| Menu Language |
|
|
|
| Progressive Scan |
|
|
|
| Digital Audio Output |
|
|
|
|
|
| |
|
| 5.1 Speaker Setup |
|
|
|
| Others |
|
|
Dynamic Range Control (DRC)
With the DVD format, you can hear a program’s sound- track in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect.
Vocal
Set Vocal to On only when a
PBC
Set Playback Control (PBC) to On or Off.
On: Video CDs with PBC are played according to the PBC.
Off: Video CDs with PBC are played the same way as Audio CDs.
Auto Play DVD
You can set up the DVD Player so a DVD disc automat- ically starts playing whenever the DVD is inserted.
If Auto Play mode is set to On, this DVD player will search a title that playback time is long most and then play back the title automatically.
On: Auto Play function is activated.
Off: Auto Play function is not activated.
Note
The Auto Play function may not work for some DVDs.
14