Marantz DV6600 manual Speaker Setting for Analog Audio, Quick, Speaker Size, Delay Time

DVD SETUP

• The sound of DVD-Audio which exceeds 96kHz(or						Speaker Setting for ANALOG AUDIO
88.2kHz) will be output as 96kHz (or 88.2kHz) even if
DOWN SAMPLING is set to OFF.				When 5.1CH is selected for ANALOG AUDIO, some speaker
When playing disc with copyright protection
				settings will be required.
• The sound will be down-sampled at 48kHz (or
				• During the HDMI output mode, any of the Speaker Setting
44.1kHz), even if you set to OFF.
						is ineffective.
DOLBY DIGITAL (Default: BITSTREAM)		QUICK
					1	Press the Cursor buttons (K or L) to select
• Set to BITSTREAM when the
						5.1CH, then press the ENTER button.
player is connected to a Dolby
					2	Press the Cursor buttons (K or
Digital decoder.	AUDIO
	DRC		ON			L) to select the below items,
• This function is effective only for							AUDIO
	DOLBY DIGITAL		BITSTREAM			then press the ENTER button.
	DOWN SAMPLING ON
the COAXIAL and OPTICAL con-	DTS		BITSTREAM
							5.1CH
	ANALOG AUDIO		2.0CH				SPEAKER SIZE
	HDMI AUDIO		AUTO
nections.							DELAY TIME
							BALANCE

•When HDMI AUDIO is set to AUTO, this setting is fixed and cannot be changed in some cases.

BITSTREAM: Output by Dolby Digital.				SPEAKER SIZE
PCM: Convert Dolby Digital to PCM.				• Press the Cursor buttons (K or L)		SPEAKER SIZE
				to select the speaker to set.
DTS (Default: BITSTREAM)	QUICK			• Press ENTER until the desired		AUDIO
						FRONT (L/R)	LARGE
• Set to BITSTREAM when the unit						CENTER	LARGE
				speaker size appears.		SUB WOOFER	ON
is connected to a DTS decoder.						SURROUND (L/R) LARGE
• This function is effective only for the		AUDIO
		DRC	ON
COAXIAL and OPTICAL connections.
		DOLBY DIGITAL	BITSTREAM
		DOWN SAMPLING ON		FRONT(L/R), CENTER, SURROUND(L/R)
		DTS	BITSTREAM
• When HDMI AUDIO is set to		HDMI AUDIO	AUTO	(Default: LARGE)
		ANALOG AUDIO	2.0CH
AUTO, this setting is fixed and				LARGE:Select this when the connected speaker is
cannot be changed in some cases.					capable of playing back sounds of 100Hz or
BITSTREAM: Output DTS sound.					less.
PCM: Convert DTS sound to PCM.				SMALL: Select this when the connected speaker is not
					capable of playing back sounds of 100Hz or
NOTE:
					less.
• Audio settings for DOLBY DIGITAL and DTS may be				OFF:	Select this when it is not connected. (It cannot
automatically changed to BITSTREAM or PCM in some					be set OFF on the FRONT speaker.)
cases when using the HDMI connection.				SUB WOOFER (Default: ON)
HDMI AUDIO (Default: AUTO)
				ON:	Select this when SUB WOOFER is connected.
• Select the number of channels				OFF: Select this when it is not connected.

English

for the HDMI audio output.	AUDIO
	HDMI AUDIO
• Refer to the table on page 16 for	MULTI PCM
	AUTO
the actual output settings.	2CH PCM
	OFF

•Connect appropriate external equipment for each setting.

•This setting cannot be changed when no equipment compatible with HDMI audio is connected to the HDMI OUT terminal.

•Even if an equipment compatible with HDMI audio is connected, this setting cannot be changed when the equipment is turned off or the HDMI output mode is set to hdOFF.

AUTO: The output channel number is selected automati- cally from Bitstream, Multi-channel or 2-channel. Suitable for monitors or amplifiers compatible with HDMI bitstream.

MULTI PCM:

Multi-channel or 2-channel signals are output from the HDMI OUT terminal.

Suitable for monitors or amplifiers incompatible with HDMI bitstream.

2CH PCM:

2 channel signals are output from the HDMI OUT terminal.

Suitable for monitors or projectors compatible with HDMI 2CH.

OFF: No audio signals are output from the HDMI OUT terminal. To use the 5.1CH AUDIO OUT jacks.

ANALOG AUDIO (Default: 2.0CH)

•This setting may not be changed

depending on the HDMI connec-

NOTES:

•OFF is not available for SUB WOOFER when SMALL is selected for FRONT(L/R).

•SMALL is not available for FRONT(L/R) when OFF is selected for SUB WOOFER.

•During DVD-Audio playback, the sound may not come out as setting due to restrictions in the disc or the play- er.

•During DVD-Audio playback, the Low Pass Filter (which filters out the sound with the sound wave frequency over 100Hz) of the SUB WOOFER will be turned off with the following speaker setting. Otherwise, the Low Pass Filter will be turned on.

FRONT(L/R): LARGE

CENTER: LARGE

SUB WOOFER: ON

SURROUND(L/R): LARGE

DELAY TIME

To enjoy 5.1-channel surround sound, the distance between the listening position and all speakers (excluding the SUB WOOFER) should ideally be set at a uniform distance on a circle. If the speakers cannot be set at this manner, the ideal listening position can be virtually created with the DELAY TIME setting.

Use the Cursor buttons (K or L) to select the setting item, then press the ENTER button.

•Press the Cursor buttons (K or L)

to select the speaker to set, then
press the ENTER button.	AUDIO
	DELAY TIME

DISTANCE	FEET
FRONT(L/R)	10ft
CENTER	10ft
SURROUND	10ft
DEFAULT	ON

tion. Set HDMI AUDIO to OFF if

AUDIO

it occurs.	DRC	ON	DISTANCE (Default: FEET)
	DOWN SAMPLING	ON
	DOLBY DIGITAL	BITSTREAM
2.0CH : Output 2ch sound from the	DTS	BITSTREAM	FEET (when the ENTER button is pressed):
	ANALOG AUDIO	2.0CH
	HDMI AUDIO	AUTO
5.1CH AUDIO OUT jacks.			The unit of distance is set to feet (“ft”).
5.1CH : Output multi channel			METERS (when the ENTER button is pressed):
sound from the 5.1CH AUDIO OUT jacks.			The unit of distance is set to meters (“m”).

5Press the SETUP button to exit.

– 29 – EN