Marantz DV-12S1 manual Video Connections, Video OUT

ENGLISH

5.1 CHANNEL AUDIO OUT

5.1channel audio refers to the current industry surround sound standard requiring two front speakers, a center speaker, two surround (rear) speakers and a sub woofer. Although in actuality there are 6 channels, because the sub woofer channel, or LFE channel, makes up a mere fraction of the total audio soundtrack, it has been designated as the 0.1 of the 5.1 system.

By utilizing the player’s internal multichannel audio decoder, the audio of DVD-Audio, Dolby Digital, DTS and MPEG DVDs can be output from the 5.1 channel discrete outputs to an AV amplifier or receiver with 5.1 channel input capability.

•Use audio cables to make connections from the player’s AUDIO OUT (5.1 channel) jacks to the equivalent input jacks on the AV amplifier or receiver.

•When making 5.1 channel analog audio connections, be sure to match the left and right channels on both components, and also make sure that the jacks of all the channels are connected correctly on both components.

•Either 2 single audio cords or a stereo cord may be used to connect the CENTER and SUB WOOFER channels to the AV amplifier or receiver.

•When making this kind of connection, be sure to select [5.1 Channel] in the Setup Navigator [Analog Jacks] screen

(page 21).

		R	L	Y	COMPONENT
				VIDEO
			1	S1/S2 C
SUB	CENTER	SURROUND
WOOFER							AC IN
			2	C
	1		1
				VIDEO OUTPUT
	2		2
RIGHT	AUDIO		LEFT	OPTICAL	COAXIAL	EXTERNAL INTERNAL IN	OUT
	OUTPUT			DIGITAL OUTPUT		REMOTE CONTROL

RL

SUB

WOOFER CENTER SURROUND

11

22

RIGHT	AUDIO	LEFT
	OUTPUT

R		DIRECT IN
L
	CENTER	SUB	L	R
DVD		WOOFER	SURROUND

AV amplifier or receiver

Video Connections

This player features S-video, composite, and component video output possibilities.

Check the manual supplied with your TV or monitor to determine the best possible connection for your system. In addition to making physical connections to your TV or monitor, it is also necessary to assign the TV screen size. You can use the [Setup Navigator] in the Setup screen General to set whether you are using a wide screen or standard size TV or monitor (page 21). Additionally, you can use the [TV Screen] setting in the Setup screen Video menu (page 36).

VIDEO OUT

•Make composite video connections to a standard TV or monitor with a video input jack.

•Use the supplied video cable to connect one of the VIDEO OUT jacks on the player to the video input on the TV or monitor.

•Be sure to match the color of the plug with the color of the jack (yellow).

		R	L	Y	COMPONENT
				VIDEO
			1	S1/S2 C
SUB	CENTER	SURROUND
WOOFER							AC IN
			2	C
	1		1
				VIDEO OUTPUT
	2		2
RIGHT	AUDIO		LEFT	OPTICAL	COAXIAL	EXTERNAL INTERNAL IN	OUT
	OUTPUT			DIGITAL OUTPUT		REMOTE CONTROL

	VIDEO
1	TV or
2	monitor

VIDEO IN

(Included)

S-VIDEO OUT

•Make S-video connections to a TV or monitor with S-video input to produce a high quality video image.

•Use an S-video cable (not supplied) to connect the S- VIDEO OUT jack on the player to S-video input on the TV or monitor.

		R	L	Y	COMPONENT
				VIDEO
			1	S1/S2 C
SUB	CENTER	SURROUND
WOOFER							AC IN
			2	C
	1		1
				VIDEO OUTPUT
	2		2
RIGHT	AUDIO		LEFT	OPTICAL	COAXIAL	EXTERNAL INTERNAL IN	OUT
	OUTPUT			DIGITAL OUTPUT		REMOTE CONTROL

S1/S2

TV or monitor

S-VIDEO IN

18