Marantz DV6400 manual Audio Setting, Speaker Size, Delay Time

DVD SETUP

Audio Setting Speaker Setting

Choose the appropriate Audio settings for your equipment as it only affect during the playback of DVD discs of the DVD player.

1Press the SETUP button in STOP mode.

2Press the B button to select CUSTOM, then press the ENTER button.

•CUSTOM mode will appear.

3 Press the s or B button to

select AUDIO, then the ENTER	AUDIO
		OFF
	DRC
button to confirm.	DOLBY DIGITAL	ON
	DOWN SAMPLING	ON
	DTS	PCM
	ANALOG	2.0 CH
	SACD	MULTI-CH

4Press the K or L button to select the below items, then press the ENTER button.

DRC (Dynamic Range Control)
(Default : OFF)	AUDIO
		OFF
• To compress the range of sound	DRC
	DTS	PCM
volume.	DOLBY DIGITAL	ON
	ANALOG	2.0 CH
	DOWN SAMPLING	ON
	SACD	MULTI-CH

When 5.1CH is selected for analog out, some speaker settings will be required.

1Press the K or L button to select 5.1CH, then press the ENTER button.

2	Press the K or L button to
	select the below items, then	5.1 CH
		AUDIO
	press the ENTER button.
		SPEAKER SIZE
		DELAY TIME
		BALANCE
SPEAKER SIZE
	• Press the K or L button to select
	the speaker to set.
		AUDIO
		SPEAKER SIZE
		FRONT (L/R)	LARGE
		CENTER	LARGE
		SUB WOOFER	ON
		SURROUND (L/R) LARGE

• Press Enter until the desired speaker size appears.

DOLBY DIGITAL (Default : ON)

QUICK

Set to ON when the player is con- nected to Dolby Digital Decoder.

ON : Output by Dolby Digital

OFF: Convert the Dolby Digital to

PCM

DTS (Default : PCM)

DTS: Output by DTS sound

Set to DTS when the unit is connected to DTS Decoder.

PCM: Convert the Dolby Digital to

PCM

AUDIO

DRC	OFF
DOLBY DIGITAL	ON
DTS	PCM
DOWN SAMPLING	ON
ANALOG	2.0 CH
SACD	MULTI-CH
AUDIO
DRC	OFF
DOLBY DIGITAL	ON
DTS	PCM
DOWN SAMPLING	ON
ANALOG	2.0 CH
SACD	MULTI-CH

FRONT(L/R), CENTER, SURROUND(L/R) (Default: LARGE)

LARGE: Select this when the connected speaker is capable of playing back sounds of 100Hz or less.

SMALL: Select this when the connected speaker is not capable of playing back sounds of 100Hz or less.

OFF: Select this when it is not connected. (It cannot be set OFF on the FRONT speaker.)

SUB WOOFER (Default: ON)

ON:	Select this when SUB WOOFER is connected.
OFF:	Select this when it is not connected.

NOTES:

• “OFF” is not available for SUB WOOFER when

“SMALL” is selected for FRONT(L/R).

• “SMALL” is not available for FRONT(L/R) when “OFF” is

selected for SUB WOOFER.

DOWN SAMPLING (Default : ON)

• Set to ON when outputting in

48kHz.	AUDIO
	DRC	OFF
	DOLBY DIGITAL	ON
	DTS	PCM
	DOWN SAMPLING	ON
	ANALOG	2.0 CH
	SACD	MULTI-CH

When playing disc with copright Protection

•Even If you select OFF, copyright protection will be acti- vated and sound will be down sampled at 48kHz.

ANALOG (Default : 2.0 CH)

2.0 CH : Output 2ch sound

5.1 CH : Output Multi channel sound

AUDIO		AUDIO
		ANALOG
DRC	OFF
		2.0 CH
DOLBY DIGITAL	ON	5.1 CH
DTS	PCM
DOWN SAMPLING	ON
ANALOG	2.0 CH
SACD	MULTI-CH

SACD (Default : MULTI-CH)

2 CH : Playback a 2ch area.

MULTI-CH : Playback a multi-ch area.

CD AREA : Playback a CD area.

•When choosing MULTI-CH, choose 5.1CH as well as the audio channel in the audio setting of the setup menu.

AUDIO		AUDIO
		SACD
DRC	OFF
		2 CH
DOLBY DIGITAL	ON	MULTI-CH
DTS	PCM	CD AREA
DOWN SAMPLING	ON
ANALOG	2.0 CH
SACD	MULTI-CH

• When in playback of DVD audio, the sound may not

come out as set due to restrictions in the disc or the

player.

• During DVD-Audio playback, the Low Pass Filter (which

filters out the sound with the sound wave frequency

over 100Hz) of the SUB WOOFER will be turned off

with the following speaker setting. Otherwise, the Low

Pass Filter will be turned on.

FRONT(L/R): LARGE

CENTER: LARGE

SUB WOOFER: ON

SURROUND(L/R): LARGE

DELAY TIME

To enjoy 5.1-channel surround sound, the distance between the lis- tening position and all speakers (excluding the Sub woofers) should ideally be set at a uniform distance on a circle. If the speakers can- not be set at this manner, the ideal listening position can be virtually created with the delay time setting.

Use the K or L button to select the setting item, then press the ENTER

button.	AUDIO
	DELAY TIME

• Press the K or L button to select	FRONT(L/R)	10ft
	DISTANCE	FEET
the speaker to set, then press	CENTER	10ft
	SURROUND	10ft
the ENTER button.	DEFAULT	ON

DISTANCE (Default : FEET)

METERS(when the ENTER button is pressed): The unit of distance is set to meters (“m”).

FEET(when the ENTER button is pressed): The unit of distance is set to feet (“ft”).

5Press the SETUP button to exit.

– 26 – EN