Marantz DV7001 manual Picture Setting, ADV Picture, Gamma, Chroma Delay, Pscan Format

6 DVD Setup Menu

!Press 2 to highlight OK in the menu and press

ENTER to confirm.

The set-up is complete now and you can start to enjoy the high quality picture.

•OFF – Disables the progressive scan mode.

To deactivate Progressive manually:

~Press OPEN CLOSE 0 to open the disc tray

without HDMI connected.

ŸPress 2 (LEFT) on the remote control. Press

AUDIO on the remote control.

The DVD background screen appears on the TV.

Tip

•There are some progressive scan TVs and high- definition TVs that are not fully compatible with this unit, resulting in an unnatural picture when playing back a DVD Video disc in the progressive scan mode. In this case, turn off the progressive scan feature on both the DVD system and your TV.

PICTURE SETTING

•Default setting: STANDARD

This DVD system provides three predefined sets of picture colour settings and one personal setting which you can define yourself.

•STANDARD – Original colour setting.

•BRIGHT – Vibrant colour setting.

•SOFT – Warm colour setting.

•PERSONAL – Selects this to personalize the picture colour setting. Use the 2/3 keys to select to the setting that best suits your personal preference and press ENTER to confirm. For an average setting, select 0.

•BRIGHTNESS – Increase the value to brighten the picture or vice versa.

•SHARPNESS – Increase the value to sharpen the picture or vice versa.

•CONTRAST – Increase the value to sharpen the picture or vice versa.

•TINT – Increase the value to darken the picture or vice versa.

•COLOR – Increase the value to enhance the color in your picture or vice versa.

46

ADV PICTURE

This player allows you to fine-tune the following video parameters.

We recommend setting the aspect ratio on your TV if the function is available.

DCDi

•Default setting: ON

DCDi (Directional Correction Deinterlacing) computes and tracks the angle of the screen edge to fill in missing pixels on the TV screen. DCDi will optimize the image quality significantly, especially during slow motion playback. This function is available only for progressive scan output.

•OFF – Select to deactivate this function.

•ON – Select to activate this function.

GAMMA

Enables you to non-linearly adjust the intensity of the picture. A positive value enables you to bring out low level detail in dark scenes, while a negative value emphasizes contrast. This function is not available when using an HDMI compatible component.

-7 to +7

CHROMA DELAY

The chroma (color) and luminance (brightness) signals are not synchronized. The Chroma Delay setting allows you to adjust the advance delay of the chroma signal to yield a perfectly clear picture. This function is not available when using an HDMI-compatible component.

-3 to +3

PSCAN FORMAT

•Default setting: OFF

Set the aspect ratio of the projected images on the screen. This function is only available for progressive scan and HDMI video output.

•SUPER WIDE – Select this to display a 4:3 picture disc on a wide-screen TV with non-linear stretching (the centre position of the screen is stretched less than the side).

•16:9 SQUEEZE – Select this to display a 4:3 picture disc on a widescreen TV without stretching. Black bars will be shown on the both sides of the TV screen.

•OFF – No aspect ratio adjustment is made when this option is selected.