Marantz DV4600 manual Panel display, Displays During Operation, Using the remote control

FUNCTIONAL OVERVIEW
Panel display
Lights up when the		Lights up when the		Lights up when the
A-B Repeat function is on.		Repeat function is on.		progressive scan
Lights up when the ALL				system is activated.
Repeat function is on.				P.SCAN	Displays a type of the disc
				DVD	which is inserted on the tray.
					• DVD: DVD
Lights up when the				VCD	• CD: Audio CD, MP3, JPEG, WMA,
inserted disc comes					Picture CD
to a pause.					• VCD: Video CD
Lights up when playing back			Displays the elapsed time of the title
			or track. The number of a new title,
in slow mode. (DVD, VCD)	Lights up when the inserted		chapter, or track is displayed when
	disc is being played back.		a chapter or track is switched.

English

Displays During Operation

Power on

No disc inserted or cannot read

Tray open

Tray closed

Loading the Disc

Lights up when the playback control is activated (VCD)

Power off

Using the remote control

Keep in mind the following when using the remote control:

•Make sure that there is no obstacle between the remote and the remote sensor on the unit.

•Use within the operating range and angle, as shown.

60

Loading the Batteries

1. Open the battery compartment cover.

2. Insert two “AA” (R6P) batteries, with each one oriented correctly.

3. Close the cover.

Cautions On Batteries

•Use “AA” (R6P) batteries in this remote control unit.

•Replace the batteries with new ones approximately once a year, though this depends on the frequency with which the remote control unit is used.

•If the remote control unit does not operate from close to the main unit, replace the batteries with new ones, even if less than a year has passed.

•The included batteries are only for verifying opera- tion. Replace them with new batteries as soon as possible.

•When inserting the batteries, be careful to do so in

the proper direction, following the and marks in the remote control unit’s battery compartment.

•To prevent damage or battery fluid leakage:

•Do not use a new battery with an old one.

•Do not use two different types of batteries such as alkaline and manganese.

•Do not short-circuit, disassemble, heat or dispose of batteries in flames.

•Remove the batteries when not planning to use the remote control unit for a long period of time.

•If the batteries should leak, carefully wipe off the fluid from the inside of the battery compartment, then insert new batteries.

– 11 – EN