CONNECTION USING COAXIAL CABLE:
Follow the instructions below to connect an external unit, such as a VCR, to your unit using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.)
VCR
VCR
INCOMING CATV CABLE |
From VCR OUT jack
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR.
2.Connect a 75 ohm coaxial cable from the VCR’s 75 ohm OUT jack to the ANT jack on the rear of the TV.
3.Press the TV/AV button until regular TV or CATV channel appears on the TV screen and press PLAY on the VCR to watch a tape.
CONNECTION USING AUDIO/VIDEO CABLES:
Follow the instructions below to connect an external unit, such as a VCR or a DVD player, to your unit using Audio/Video cables. (CABLES NOT INCLUDED.)
INCOMING CATV
CABLE (VCR)
VCR or DVD player
VCR/DVD |
From VCR OUT jacks |
AUDIO/VIDEO Cord |
1.Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of the VCR or DVD player.
2.Connect the left and right audio cable from the VCR/DVD’s Audio OUT jacks to the TV’s left and right Audio 2 IN jacks. Connect the VCR/DVD’s Video OUT jack to the TV’s VIDEO 2 IN jack.
3.Press the TV/AV button until VIDEO2 appears on the TV screen.
10