SETTING CHANNELS INTO MEMORY
This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. In addition to normal VHF/UHF channels, this unit can receive up to 125 Cable TV channels.
1 4
32 5
Channel
Channel System Auto
Antenna CATV
SkipOff
Current Ch. 13
Fine
Auto Program
21
While in the TV mode, press the MENU button once; the Video menu will appear. Press the VOLUME Up1 or Down button to select the Channel Setting. 2Press the
CHANNEL3 Up or Down button until ANTENNA is
selected. 4 5
Press the VOLUME Up or Down button to select TV (VHF/UHF Channels) or CATV1 (Cable2TV).
| Channel |
|
1 | Channel System | Auto |
| Antenna | CATV |
2 | Skip | Off |
| Current Ch. | 13 |
| Fine |
|
| Auto Program |
|
Press the CHANNEL Up 1 or Down 2 button until AUTO | ||
PROGRAM is selected. |
|
|
1
2
Press the VOLUME Up button to start Auto Programming and the unit will automatically1 cycle through all the channels and store active channels into memory. When finished, press the EXIT button to exit the menu
settings.2
FAQs:
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or local area, provides. Contact your company to determine the number of channels in your area.
21