Marantz PD5010D manual

Page 55

*1 Only when using a graphic accelerator board that is capable of displaying 852×480.

*2 This signal is converted to a 1228 dots × 768 lines signal.

*3 The picture is displayed in the original resolution.

*4 The aspect ratio is 5:4. This signal is converted to a 960 dot×768 line signal.

*5 Normally the RGB select mode suite for the input signals is set automatically. If the picture is not displayed properly, set the RGB mode prepared for the input signals listed in the table above.

*6 To connect the monitor to Macintosh computer, use the supplied monitor adapter (D-Sub 15-pin) to your computer's video port. If your computer has a mini D-Sub 15-pin connector, you may have to use the supplied RGB cable.

*7 Other screen modes (ZOOM and STADIUM) are available as well.

NOTE:

•While the input signals comply with the resolution listed in the table above, you may have to adjust the position and size of the picture or the fine picture because of errors in synchronization of your computer.

•When a 1280 dot × 1024 line signal or 1600 dot × 1200 line signal is input to the monitor, the picture will be compressed.

•This monitor has a resolution of 1365 dot × 768 line. It is recommended that the input signal should be XGA, wide XGA, or equivalent.

•With digital input some signals are not accepted.

•The sync may be disturbed when a nonstandard signal other than the aforementioned is input.

•If you are connecting a composite sync signal, use the HD terminal.

*“IBM PC/AT” and “VGA” are registered trademarks of IBM, Inc. of the United States.

*“Apple Macintosh” is a registered trademark of Apple Computer, Inc. of the United States.

48

Image 55

Contents Model PD5010D User Guide Important Information PrecautionsTo avoid damage and prolong operating life Avertissement PrécautionsDOC avis de conformation Mises en garde et précautions de sécuritéRemarque Medinah Road Roselle, IL Tel -307-3100 Fax Limited Warranty for the Marantz Slim Series Plasma MonitorContents Ventilation Requirements for enclosure mounting How to Attach Options to the Plasma MonitorOptions Features you’ll enjoy includeContents of the Package IntroductionFront View Part Names and FunctionRGB2/ DVD2/ HD2 Rear View/ Terminal BoardRGB/PC Remote Control Unit5MULTI Battery Installation and ReplacementOperating Range Handling the remote control unitApprox 7m/ 23ft Personal computer with a digital RGB output InstallationConnections with Equipment that has a Digital Interface Connecting Your Document CameraConnecting Your VCR or Laser Disc Player Connecting Your DVD PlayerRight Left External Speaker ConnectionsRGB Pin Assignments and Signal Levels for 15 pin RGB AnalogBasic Operations To check the remaining time To set the off timerTo cancel the off timer After the power is turned off with the off timerWatching with a wide screen manual When watching videos or digital video discsWhen watching high definition video source Wide OperationsWatching computer images with a wide screen When Picture Size is set to OFF Supported resolution Picture Size settingShowing a couple of pictures on the screen at the same time Selecting the input signals to be displayedAdjusting the OSM controls Multi Screen OperationsMenu Operations OSMOn Screen Menu ControlsMain menu Sub menu Functions Adjusting the computer image Picture Settings MenuAdjusting the picture Picture adjustment screen Types of picture modes Example Setting the Theater mode Setting the color temperature Setting the color temperatureExample Setting Once the setting is completed Adjusting the white balance Example Adjusting the White Balance Types of noise reduction Example Setting NR-3Reducing noise in the picture NR Sound settings menu Sound Settings MenuAdjusting the treble, bass and left/right balance Example Adjusting the bassWhen Auto Picture is OFF Screen Settings MenuAdjusting the Position,Size,Fine Picture,Picture Adj Example Adjusting the vertical position in the normal modeSetting the on-screen display Function Settings MenuAdjusting the position of the menu display Adjusting the position of the menu displayExample Adjusting the position of the menu display To adjust the positionPower management settings Setting the power management for computer imagesExample Turning the power management function on Power management functionDescription Turning the picture back on POWER/STANDBY indicatorGray Level Setting the picture to suit the movieSetting the gray level for the sides of the screen Cinema ModeReducing burn-in of the screen Setting RGB3 ADJWhen you adjust the RGB3 ADJ Example Setting PLE to LockInverse Resetting to the default valuesPLE OrbiterAudio Input Option Settings MenuSetting the allocation of the audio connectors Setting the BNC connectorsBNC Select Setting a computer image to the correct RGB select screenExample Setting the RGB Select mode to Motion To set the RGB select mode to MotionHD Select modes Setting high definition images to the suitable screen sizeExample Setting the 1080B mode to RGB Select modesPicture Size Setting the picture size for RGB input signalsExample Setting the on mode to OFF Information MenuLanguage settings Setting the language for the menusSetting the video signal format Example Setting the menu display to DeutschNtsc Video signal formatsConnections Type of connector D-Sub 9-pin maleExternal Control ApplicationUnit ID 1 and Unit ID CommandCheck Sum CKS, Error Processing, and ACK Communication FormatCommand Reference List Color Gain Data Audio Mute OnAudio Mute Off OSM SelectBright Gain Data Input Mode RequestSharpness Gain Data Contrast Gain DataGreen Gain Data RED Gain DataBlue Gain Data Video ADJ Request Long Life Set Failure Mode RequestAudio Select Set Audio Select RequestSupported resolution Table of Signals SupportedComputer input signals supported by this system Page Symptom Checks Remedy TroubleshootingSignals SpecificationsAustria Is a registered trademark