Memorex MT1190C instruction manual Important Safeguards, Color Television, English, V-Block Setup

INSTRUCTION MANUAL	COLOR TELEVISION
ENGLISH	MT1190C
FEATURES	CAUTION
• On-Screen graphics guide you through setup features and operations.	• Place your TV in a room with adequate ventilation.
• Automatic programming of channels allows easy selection of stations available in your	• Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
viewing area.	• Do not place your TV on soft surfaces, such as rugs or blankets.
• Sleep timer programs the TV to turn itself off at a preset time.	• Leave enough room for air to circulate around the bottom, top and back of the set.
• One day timer programs the TV to come on once at a preset time.	• Your TV works on normal household current (120 volts, 60 Hz). For safety purpose, your
• Weekly timer programs the TV to come on at a preset time every day.	TV’s electrical plug has one blade wider than the other. If you cannot insert the plug fully
• 26 button infrared remote control allows remote operation.	into the socket, try reversing it.

•VHF/UHF/CATV tuning allows reception of standard broadcasts or cable TV channels.

•	Close caption decoder displays captions or half-screen text.	In the space provided, record the serial and model numbers, located on the rear of the unit.
•	V-BLOCK function.
		SERIAL NO.______________	MODEL NO.______________

IMPORTANT SAFEGUARDS

1.Read instructions - All the safety and operating instructions should be read before the TV is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference

3.Heed Warnings - All warnings on the TV and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Cleaning - Unplug TV from the wall outlet before cleaning - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

6.Attachments - Do not use attachments not recommended by the TV manufacturer as they may cause hazards.

7.Water and Moisture - Do not use this TV near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like.

8.Accessories - Do not place this TV on an unstable cart, stand, tripod,

bracket, or table. The TV may fall, causing serious injury to someone and serious damage to the TV. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the TV.

Any mounting of the TV should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the

15.	Lightning - For added protection for this TV during a lightning storm, or when it is left unattended
	and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or
	cable system. This will prevent damage to the TV due to lighting and power-line surges.
16.	Power Lines - An outside antenna system should not be located in the vicinity of overhead power
	lines or other electric light or power circuits, or where it can fall into such power lines or circuits.
	When installing an outside antenna system, extreme care should be taken to keep from touching
	such power lines or circuits as contact with them might be fatal.
17.	Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles
	as this can result in a risk of fire or electric shock.
18.	Object and Liquid Entry - Never push objects of any kind into this TV through openings as they
	may touch dangerous voltage points or short-out parts that could result in a fire or electric shock.
	Never spill liquid of any kind on the TV.
19.	Servicing - Do not attempt to service this TV yourself as opening and removing covers may expose
	you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
20.	Damage Requiring Service - Unplug this TV from the wall outlet and refer servicing to qualified
	service personnel under the following conditions:
	a) When the power-supply cord or plug is damaged.
	b) If liquid has been spilled, or objects have fallen into the TV.
	c) If the TV has been exposed to rain or water.
	d) If the TV does not operate normally by following the operating instructions. Adjust only those
	controls that are covered by the operating instructions as an improper adjustment of other
	controls may result in damage and will often require extensive work by a qualified technician to

SPECIFICATIONS

AC Power Input	120 V, 60 Hz
AC Power	98 Watts
Consumption
Chassis Construction	IC Solid State
Picture Tube	19”
(measured diagonally)
Speaker	3.5 ⋅ 2 in (90 ⋅ 50 mm)
	Oval, 8 ohm
Tuner	181 Channel, Freq. Synthesized
Remote Control	Infrared, Direct Access
	2 ⋅ AA batteries
Receiving Channels	VHF		2-13
	UHF		14-69
	CATV:
	Mid Band		14-22
	Super Band		23-36
	Hyper Band		37-65
	Ultra Band		66-94, 100-125
	Sub Mid Band		1, 95-99
Antenna Input	75 ohm (VHF/UHF)
Impedance	Coaxial Input
		As an ENERGY STAR® Partner, MEMCORP has
		determined that this product meets the ENERGY
		STAR® guidelines for energy efficiency.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with the arrowhead symbol within an	The exclamation point within an equilateral triangle is
equilateral triangle, is intended to alert the user to the	intended to alert the user to the presence of important
presence of uninsulated “dangerous voltage” within the	operating and maintenance (servicing) instructions in the
product’s enclosure that may be of sufficient magnitude	literature accompanying the appliance.
to constitute a risk of electric shock to someone.

PRINTED IN MALAYSIA 1111-4050M178 MP0108-1

manufacturer.

9.The TV and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the TV and cart combination to overturn.

10Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the TV on a bed, sofa, rug, or other similar surface. This TV should not be placed in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

11.Power Sources - This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your TV dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions.

12.Grounding or Polarization - This TV may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

13.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the TV.

14.Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the TV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna- discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See Figure 1.

	restore the TV to its normal operation.
	e) If the TV has been dropped or damaged in any way.
	f) When the TV exhibits a distinct change in performance - this indicates a need for service.
21.	Replacement Parts - When replacement parts are required, be sure the service technician has
	used replacement parts specified by the manufacturer or have the same characteristics as the
	original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
22.	Safety Check - Upon completion of any service or repairs to this TV, ask the service technician to
	perform safety checks to determine that the TV is in proper operating condition.
23.	Wall or Ceiling Mounting - The TV should be mounted to a wall or ceiling only as recommended
	by the manufacturer.
24.	Heat - The TV should be situated away from heat sources such as radiators, heat registers, stoves,
	or other products (including amplifiers) that produce heat.
	Note to CATV system installer:
	This reminder is provided to call the CATV system installer’s attention to Section 820-40 of the NEC
	which provides guidelines for proper grounding and, in particular, specifies that the cable ground
	shall be connected to the grounding system of the building, as close to the point of cable entry as

practical.

FIGURE 1

EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

GROUND	ANTENNA
	LEAD-IN WIRE
CLAMP
NEC - NATIONAL
ELECTRICAL CODE	ANTENNA DISCHARGE UNIT
S2898A	(NEC SECTION 810-20)
	GROUNDING CONDUCTORS
	(NEC SECTION 810-21)
	GROUND CLAMPS
ELECTRIC SERVICE	POWER SERVICE GROUNDING
EQUIPMENT	ELECTRODE SYSTEM (NEC ART 250, PART H)

ANTENNA / AUDIO / VIDEO INPUT CONNECTIONS

OPERATING CONTROLS AND FUNCTIONS

COMBINATION VHF/UHF ANTENNA

(Single 75 ohm cable or 300 ohm twin-lead wire)

Connect the 75 ohm cable from combination VHF/UHF antenna to the antenna jack. If your combination antenna has a 300 ohm twin-lead wire, use the 300-75 ohm matching transformer (not included).

75 ohm

To prevent problems it is recommended that you	ANT
use only the specified transformer. (Transformer
		OR
Part No.: 1398-00301)
(USA only)	Transformer
	(not included)	300 ohm

CATV CONNECTIONS

For Subscribers to Basic Cable Service:

For basic cable service without a converter/descrambler box, connect the CATV 75 ohm coaxial cable directly to the antenna jack on the rear of the TV.

To 75 ohm Coaxial

Jack on TV

INCOMINGEXT. ANT.

COAXIALConverter/DescramblerUHF/VHF CABLE

∞	SPLITTER	A		∞
	A/B Switch		B

USING THE AUDIO AND VIDEO JACKS

The AUDIO and VIDEO INPUT jacks on the front of the TV allow you to receive audio (sound) and video (picture) from external sources, such as VCR, Video Disc, etc. Follow the instructions below to play video from an external source.

1 . Use audio/video cables (not included) to connect to the AUDIO and VIDEO INPUT jacks on the front of the TV to audio and video output jacks on an external source.

FRONT PANEL		REAR PANEL	1.	POWER SWITCH
			2.	CHANNEL UP/DOWN (5/∞) BUTTON
			3.	VOLUME UP/DOWN (5/∞) BUTTON
INPUT	POWER		4.	REMOTE CONTROL SENSOR
VIDEO AUDIO	VOLUME CHANNEL
			5.	AUDIO INPUT JACK
			6.	VIDEO INPUT JACK
6 5 4	3 2 1	7	7.	VHF/UHF EXT. ANT. JACK
				(REAR OF SET)

	• The remote control unit requires two 1.5 volt “AA” size batteries. The battery compartment is
	located on the back of the unit. To open, press down of the lid and slide toward the bottom of
	the unit. Install the batteries exactly as shown by the diagram in the compartment.
	• If one or both of the batteries are reversed, the REMOTE CONTROL will not operate and the
REMOTE CONTROL	unit may be damaged.
	• Do not allow strong sunshine to fall on the TV set front panel as this may affect the operation
	of the remote control.

ANT

Some cable companies offer “premium pay” channels in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the cable company. Below are illustrations for connection of these types of converter/ descrambler devices with the TV’s VHF antenna jack.

For Subscribers to Scrambled Cable Service:

To allow viewing of all channels through converter/descrambler. TV must be set to the output channel of the converter/descrambler (usually ch 3 or 4).

INCOMING		To 75 ohm Coaxial	EXT. ANT.
		Jack on TV
			UHF/VHF
COAXIAL CABLE
	∞	Converter/Descrambler		∞

For Subscribers to Unscrambled Basic Cable with Scrambled Premium Channels:

You may need to use a two-set signal splitter (sometimes called a “two-set coupler”) and an A/B switch box from the cable installer or an electronics supply store. With the A/B switch in “B” posi- tion you can directly tune to any non-scrambled channels using your TV’s tuning system or remote control. With the switch in “A” position, you can tune your TV to the output channel of the decoder (usually CH 3 or 4) and use the box to tune scrambled channels. Since cable systems vary, you may wish to consult your local cable company.

2.Press the TV/VIDEO button on remote control to select the VIDEO mode and the VIDEO indication will appear on the screen.

3.Operate the VCR, Video Disc or etc. as described in its owner’s manual. The TV will monitor playback.

You must return the TV to TV mode for regular TV viewing.

If the TV does not receive a signal from an external source, the VIDEO display will appear on screen.

INPUT

VIDEO AUDIO VOLUME CHANNEL POWER

VIDEO OUT AUDIO OUT

1

2

3

4

5

POWER	SLEEP		TV/VIDEO
1	2	3
4	5	6
7	8	9	TV/CAP/TEXT
100	0	RECALL	CH 1/2

CHANNEL

VOLUME

MUTE

MENU Q. REV.

13

12

11

10

9

8

7

6

1.	POWER BUTTON - Press to turn the TV on or off.
2.	NUMBER BUTTONS - Press to select a channel. For channels 1-9, press 0, then
	the channel you want to watch. For example, for channel 6, press 0, 6. For channels
	100 -125, press the 100 button, then press the last two digits of the channel you
	want to watch. For example, for channel 116, press 100, 1, 6. Note: Make sure you
	press the second or third digit of a channel within a few seconds of pressing the
	first digit. If you don’t, you’ll have to start over.
3.	MUTE BUTTON - Press once to eliminate sound. Press again to restore sound.
4.	MENU BUTTON - Press to call up the main menu screen. Also, press to enter data
	when going to the next step of an operation.
5.	– AND + BUTTONS - Press to adjust or select functions listed in on-screen displays.
6.	Q. REV. (QUICK REVIEW) BUTTON - Press to return to the previous channel. For
	example, if you were watching channel 2, then use the Number buttons to switch to
	channel 6, pressing the Q. REV button will return the TV to channel 2.
7.	VOLUME (UP/DOWN) BUTTONS - Press to raise or lower the sound.
8.	CHANNEL (UP/DOWN) BUTTONS - Press to scroll up or down through the
	channels.
9.	RECALL BUTTON - Press to display the channel being viewed. Press again to
	display the time. Press again to remove the on-screen display. Note: If the RECALL
	button is pressed when the TV is in closed caption mode, captions or text will not be
	displayed.
10. CH1/CH2 BUTTON - Switches between channel 1 and channel 2 of the closed
	caption mode.
11. TV/CAP(tion)/TEXT BUTTON - When you are watching a closed caption program,
	press this button to switch between the standard TV screen, closed captioning and
	half-screen text.
12. TV/VIDEO BUTTON - Pressing this button permits the TV to be used as a monitor
	to view program sources such as a VCR, Video Disc, etc. Press again to resume

VCR

TV OPERATIONS SET UP

normal TV function.

13. SLEEP BUTTON - Press to start the sleep time or to display the time left in a sleep

timer.

TV OPERATIONS SET UP

SETTING LANGUAGE	MENU TUE 1:35 PM	Manual Programming (Add/Delete Channels)		CH PROGRAM
	CLOCK SET
The menu screen can be programmed to appear in English, French or	PROGRAM TIMER	1.	Press MENU to display main menu.	AIR / CABLE	CABLE
	PICTURE ADJUST			CH MEMORY
Spanish as procedure below:	V-BLOCK SET			AUTO SEARCH
	LANGUAGES
	CH PROGRAM	2.	Select (+) or (-) until CH PROGRAM, press MENU.	EXIT
	EXIT
1. Press MENU to display main menu.	[+] / [-] : MENU SELECT	3.	Select (+) or (-) until CH MEMORY, press MENU.	[+] / [-] : SELECT
	[MENU] : ENTER			[MENU] : AIR/CABLE
2. Select (+) or (-) until LANGUAGE, press MENU to select the desired		4.	Select the desired channels to be added or deleted using either the
language.			NUMBER or CHANNEL (8/9) buttons.	CH PROGRAM
		5.	Press (+) to add (it will turn white) or (-) to delete (it will turn red) the	AIR / CABLE	CABLE
3. Select (+) or (-) until EXIT, press MENU to exit.				AUTO SEARCH
				EXIT
			channel.	CH MEMORY
		6.	Repeat steps 4 and 5 to add or delete other channels.	[MENU] : ENTER
				[+] / [-] : SELECT

Weekly Timer

1.	Repeat steps 1 and 2 of One Day Time.
2.	Select (+) or (-) until WEEKLY, press MENU and the OFF (or ON) beside
	WEEKLY will flash.
3.	Select (+) or (-) until ON, press MENU to enter the weekly timer screen.
4.	Repeat steps 5 and 6 of One Day Timer.
5.	Press MENU to select the day(s) of the week you do not want the TV to
	come on. Once that day is flashing, use (+) or (-) to disable or enable
	the selection. White indicates TV will come on and red is vice versa.

PROGRAM TIMER

ONE DAY OFF WEEKLY ON

EXIT

[+]/ [-] : ON/OFF [MENU] : ENTER

WEEKLY TIMER

ON TIME OFF TIME CH

--: -- AM -- : -- AM 10

SUN MON TUE WED THU FRI SAT EXIT

[MENU] : MOVE

[+] / [-] : ADJUST

CLOSED CAPTION MODE

Close caption mode allows user to read the words of a broadcast on-screen while hearing them.

There are two types of closed captioning:

•Captions - Dialogue and description of the action appear in a box at the bottom of the screen.

•Text - Words appear on the screen. This is often used for channel guides.

Often, both modes are accessible in more than one languages. Close caption is available only on programs with closed captioning.

1.	Press TV/CAP(tion)/Text button until CAPTION or TEXT (whichever
	you want) appears on-screen bottom right corner.
2.	Press CH1/CH2 button to select English (CH1) or foreign languages

SETTING THE CLOCK

		CLOCK SET
1.	Press MENU twice until CLOCK SET screen.	SUN -- : -- AM
		EXIT
2.	Set the correct day, hour(s), minute(s) and AM/PM for the CLOCK using
	(+) or (-) and press MENU after each entry to go to the next step.	[MENU] : MOVE
		[+] / [-] : ADJUST
3.	While EXIT is flashing, press (+) or (-) to exit.
		CLOCK SET
You may have to reset the clock it there is a power outage or if you unplug the TV.		TUE 1 : 35 PM
		EXIT
To correct day or time, repeat step 1, press MENU repeatedly until the desired
item is flashing, make correction using (+) or (-). Finally press MENU until EXIT
flashing and press (+) or (-) to exit.		[MENU] : MOVE
		[+] / [-] : ADJUST

7. Press MENU to return to the CH PROGRAM screen.
8. Press MENU to exit while EXIT is highlighted.		CH MEMORY
		CABLE 10
If you don’t program channels, you will still receive channels when you press	[+]	: ADD
either the CHANNEL (8/9) or Number buttons. But you will also have to scan
	[-]	: DELETE
through channel that have no reception or very poor reception when you press	[MENU] : EXIT
the CHANNEL (8/9) buttons.

TIMERS SET UP

One Day Timer	PROGRAM TIMER
1. Press MENU to display main menu.	ONE DAY	ON
	WEEKLY	OFF
	EXIT
2. Select (+) or (-) until PROGRAM TIMER, press MENU.

6. While EXIT is blinking, press (+) or (-) to exit.

Sleep Timer

1.Press SLEEP to enter sleep timer screen.

2.Press SLEEP repeatedly until the desired sleep time (in steps of 10 minutes from 00 (OFF mode) up to 90 minutes).

To check remaining time, press SLEEP. To cancel sleep timer, set sleep time to 00.

WEEKLY TIMER
ON TIME	OFF TIME	CH
1 : 00 PM	2 : 00 AM	22

SUN MON TUE WED THU FRI SAT

EXIT

[MENU] : MOVE

[+] / [-] : ADJUST

SLEEP 60

(CH2) caption or text.	CAPTION
	CH 1

CABLE TV OPERATION

1.Press MENU.

2.Use (+) or (-) until CH PROGRAM, press MENU.

3.Press MENU until CABLE appears beside AIR/CABLE.

(In CATV mode, the channel number changes color from yellow to green.)

On CATV (Cable Television) system, programs are brought into the home on VHF CH 2~13, mid- band CH A~I, super band CH J~W, hyper band CH AA~CCC, ultra band CH W+30~W+84 and sub mid-band CH 5A, A5~A1.

CH Number	Corresponding	CH Number	Corresponding
on TV	CATV CH	on TV	CATV CH

PROGRAMMING CHANNELS

CH PROGRAM

Automatic Programming

	AIR / CABLE	CABLE
	AUTO SEARCH
	CH MEMORY
1. Press MENU to display main menu.	EXIT
	[+] / [-] : SELECT
2. Select (+) or (-) until CH Program, press MENU.	[MENU] : AIR/CABLE
3. Press MENU until the mode (AIR or CABLE) that corresponds to your
TV signal system appears beside AIR/CABLE.
	CH PROGRAM
4. Select (+) or (-) until AUTOSEARCH, press MENU to start it.	AIR / CABLE	CABLE
The TV will automatically cycle through all the TV or CABLE channel
	CH MEMORY
	AUTO SEARCH

depending on the mode selected, and store active channel in its memory.	EXIT
When complete, the CH PROGRAM screen will re-appear on-screen.	[+] / [-] : SELECT
	[MENU] : START

	(Clock time must be set before proceeding this step, go to Setting the	[+] / [-] : ON/OFF
		[MENU] : ENTER
	Clock)
3.	While ONE DAY is highlighted, press MENU, the OFF (or ON) beside	ONE DAY TIMER
	ONE DAY will flash.	ON TIME	OFF TIME CH
		-- : -- AM	-- : -- AM 10
4.	Select (+) or (-) until ON, press MENU to enter the one day timer screen.		EXIT
5.	Set the hour, minute(s) and AM/PM for both ON TIME and OFF TIME	[MENU] : MOVE
	using (+) or (-) and press MENU after each entry to go to the next step.	[+] / [-] : ADJUST
	(The OFF TIMER changes to exactly three hours after the ON TIME).
6.	Select the desired channel using either Number, CHANNEL 8/9 or (+)	ONE DAY TIMER
		ON TIME	OFF TIME CH
	or (-) buttons then press MENU.
		1 : 00 AM	2 : 00 AM 22
7.	While EXIT is blinking, press (+) or (-) to exit.		EXIT

[MENU] : MOVE

[CH 8/9] : ADJUST

ADJUSTING THE PICTURE

PICTURE ADJUST

1. Press MENU to display main menu.

		ADJUST
2.	Select (+) or (-) until PICTURE ADJUST, press MENU.	RESET
		EXIT
3.	Press MENU while ADJUST is highlighted.	[+] / [-] : SELECT
4.	Press MENU to select the feature. (CONTRAST, BRIGHTNESS, COLOR,
		[MENU] : ENTER

TINT OR SHARPNESS)

5.Use (+) or (-) to adjust the picture. The bar scale shows the level of adjustment.

6.Press MENU until PICTURE ADJUST screen appears.

7. Select (+) or (-) until EXIT, press MENU to exit.		CONTRAST	63
	Picture Adjustments
FUNCTION	(-) Button	(+) Button
CONTRAST	Weaker	Stronger

1	5A	66	W+30
2	2	67	W+31
↓	↓	68	W+32
13	13	↓	↓
14	A	94	W+58
15	B	95	A5
↓	↓	96	A4
35	V	97	A3
36	W	98	A2
37	AA,W+1	99	A1
38	BB,W+2	100	W+59
↓	↓	101	W+60
62	ZZ,W+26	102	W+61
63	AAA,W+27	↓	↓
64	BBB, W+28	125	W+84

5. Select (+) or (-) until CH Program, press MENU to exit.	To cancel a timer, follow steps 1 to 3. At step 4, use the (+) or (-) to change the ON to OFF.
	The one day timer has priority when the same time value is set for the ON TIME field of both the one day
	timer and the weekly timer.
To stop automatic programming while it is in progress, press MENU.	You may have to reprogram the timer if there is a power outage or if the TV is unplugged.

BRIGHT(ness)	Darker	Lighter
COLOR	Paler	Deeper
TINT	Greenish	Purplish
SHARPNESS	Softer	Sharper

To reset the picture settings to the initial state, repeat steps 1 and 2. Select (+) or (-) until RESET, press MENU. Then press MENU to exit.

65 CCC,W+29

The actual number of channels received depends upon channel reception in your area or your cable system. Consult your local Cable TV company to find out which of these channels are receivable and which type of Cable system is used in your area.

V-BLOCK SETUP

V-Block allow users to program their TV to automatically block an incoming program with certain level of violence, sexual content and strong language based on age, content or both ratings.

V-BLOCK SET UP

1.	Press MENU to display main menu.	MENU SUN 11:23 AM
		PROGRAM TIMER
		CLOCK SET
		V-BLOCK SET
2.	Select (+) or (-) until V-BLOCK SET, press MENU.	PICTURE ADJUST
		CH PROGRAM
		LANGUAGES
3.	Use the number buttons to input “0000”. (the preset pass number	EXIT
		[MENU] : ENTER
		[+] / [-] : MENU SELECT
	is 0000), then press MENU.
4.	Press MENU, the OFF (or ON) beside V-BLOCK will flash.	V-BLOCK SET
		PASS NUMBER
		? ? ?	?
5.	Select (+) or (-) until ON, press MENU.
6.	Select (+) or (-) until EXIT, press MENU to exit.	[+] / [-] : EXIT
		[MENU] : ENTER
		V-BLOCK SET
To disable block, set V-BLOCK to OFF.		V-BLOCK	ON
If you turn the TV on for the first time, setting V-BLOCK to ON alone will not enable
		CHANGE RATING
the block unless you change the preset state for MPAA and TV Rating from OFF to		CHANGE NUMBER 0000
		EXIT
any rating. In case you forget the pass number call your nearest Service Centre for		[+] / [-] : SELECT
assistance.
		[MENU] : ENTER

MPAA RATING SET UP

									V-BLOCK SET
1.	Go to V-BLOCK SET menu screen.								V-BLOCK	ON
									CHANGE RATING
2.	Select (+) or (-) until CHANGE RATING, press MENU.								CHANGE NUMBER 0000
									EXIT
3.	While MPAA RATING is highlighted, press MENU, the OFF								[+] / [-] : SELECT
									[MENU] : ENTER
	(or any rating) beside MPAA RATING will flash.
4.	Select (+) or (-) until the desired rating, press MENU.								V-BLOCK SET
									MPAA RATING	PG-13
									TV RATING	TV-PG-DLSV
									ENGLISH RATING OFF
5.	Select (+) or (-) until EXIT, press MENU to exit.								FRENCH RATING OFF
									EXIT	OFF
									LOADING
									[+] / [-] : SELECT
									[MENU] : ENTER
Rating rotates from lower to higher. X is the highest rating.
		OFF	G	PG	PG-13	R	NC-17	X

All programs with a higher rating than the one selected will also be blocked.

If you don’t want to block MPAA RATING, set it to OFF.

V-BLOCK is activated only on programs and tapes that have the rating signal and if activated “V-BLOCK” message together with the rating level appears on-screen. The channel blocking will cease if the input source or if the channel is changed.

TV RATING SET UP		V-BLOCK SET
		MPAA RATING	PG-13
1.	Go to CHANGE RATING sub-menu screen.	TV RATING	TV-PG-DLSV
		ENGLISH RATING OFF
		FRENCH RATING OFF
2.	Select (+) or (-) until TV RATING, press MENU.	LOADING	OFF
		EXIT
3.	Select (+) or (-) until the desired rating appears beside TV RATING,	[+] / [-] : SELECT
		[MENU] : ENTER

press MENU.

When user select TV-Y7, TV-PG, TV-14 or TV-MA and press MENU, the sub-ratings (content-based rating) will appear beside the selected main rating. User can select either only main rating or combine with the sub-ratings as below:

TV-Y7(FV), TV-PG(DLSV), TV-14(DSLV), TV-MA(LSV)

FV : Fantasy Violence

D : Suggestive Dialogue

L: Adult Language S : Sexual Situation V : Violence

4.In case of sub-rating selection:

While the sub-rating is flashing, press (+) or (-) repeatedly to add or delete the sub-ratings (yellow blank Indicate delete) then press MENU after each entry.

5.Select (+) or (-) until EXIT, press MENU to exit.

Rating rotates from lower to higher. TV-MA is the highest rating.

OFF TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA

All programs with a higher rating than the one selected will automatically be blocked. If you don’t want to block TV RATING, set it OFF.

When user select only main rating without any sub-rating then program will be blocked only for main rating, ignoring the sub-rating. But if user select in combination then programs with higher rating plus similar sub- rating than the one selected will automatically be blocked.

	V-BLOCK SET
CHANGING A PASS NUMBER	V-BLOCK ON
	CHANGE RATING
	CHANGE NUMBER 0000
1. Go to V-BLOCK SET menu screen.	EXIT

[+] / [-] : SELECT

2. Select (+) or (-) until CHANGE NUMBER, press MENU, the numbers [MENU] : ENTER beside it will flash.

V-BLOCK SET

3. Input the desire numbers using the Number button, press MENU.

V-BLOCK OFF

CHANGE RATING

4. Press MENU to re-conform your entry then select exit.To make correction CHANGE NUMBER 1234

EXIT

press (+) or (-) and repeat from step 2.

[0] - [9] : NUMBER

5. Select (+) or (-) until EXIT, press MENU to exit.	[MENU] : ENTER
	V-BLOCK SET
	PASS NUMBER
	1	2	3	4

[+] / [-] : NO

[MENU] : YES

ENGLISH RATING/FRENCH RATING SET UP

This setting is use to receive data service for Canadian English/French Language Rating System in according with EIA-744-A Standard.

1.	Go to CHANGE RATING sub-menu screen.	V-BLOCK SET		V-BLOCK SET
2.	Select (+) or (-) until ENGLISH or FRENCH	MPAA RATING	PG-13	MPAA RATING	PG-13
		TV RATING	TV-PG-DLSV	TV RATING	TV-PG-DLSV
		ENGLISH RATING OFF		ENGLISH RATING OFF
	RATING, press MENU, the OFF (or ON) beside it	FRENCH RATING OFF		FRENCH RATING OFF
		LOADING	OFF	LOADING	OFF
	will flash.	EXIT		EXIT
		[+] / [-] : ON/OFF		[+] / [-] : ON/OFF
		[MENU] : ENTER		[MENU] : ENTER
3.	Select (+) or (-) until ON, press MENU.
4.	Select (+) or (-) until the desire rating, press MENU,	ENGLISH RATING		FRENCH RATING
	the OFF (or ON) beside it will flash.	C8+	OFF	8+	OFF
		C	OFF	G	OFF
		G	OFF	13+	OFF
		PG	OFF	16+	OFF
5.	Select (+) or (-) until ON, press MENU.	14+	OFF	18+	OFF
		18+	OFF
		EXIT		EXIT
6.	Select (+) or (-) until EXIT, press MENU to exit.	[+] / [-] : ON/OFF		[+] / [-] : ON/OFF
		[MENU] : ENTER		[MENU] : ENTER
LOADING SET UP		V-BLOCK SET		V-BLOCK SET
		MPAA RATING	PG-13	MPAA RATING	PG-13
1.	Go to CHANGE RATING sub-menu screen.	TV RATING	TV-PG-DLSV	TV RATING	TV-PG-DLSV
		FRENCH RATING OFF		FRENCH RATING ON
		ENGLISH RATING ON		ENGLISH RATING OFF
		LOADING	OFF	LOADING	OFF
		EXIT		EXIT
2.	Select (+) or (-) until LOADING, press MENU, the	[+] / [-] : SELECT		[+] / [-] : SELECT
	OFF (or ON) beside it will flash.
		[MENU] : ENTER		[MENU] : ENTER
3.	Select (+) or (-) until ON, press MENU.
		V-BLOCK SET		V-BLOCK SET
4.	Press MENU to exit.	MPAA RATING	PG-13	MPAA RATING	PG-13
		TV RATING	TV-PG-DLSV	TV RATING	TV-PG-DLSV
		ENGLISH RATING ON		ENGLISH RATING OFF
		FRENCH RATING OFF		FRENCH RATING ON
		LOADING	ON	LOADING	ON
		EXIT		EXIT
		[+] / [-] : ON/OFF		[+] / [-] : ON/OFF
		[MENU] : ENTER		[MENU] : ENTER

Set ENGLISH or FRENCH RATING to OFF if you don’t want to block.

Set LOADING to OFF if you don’t want to load any ENGLISH or FRENCH RATING.

For threshold rating system if any rating is set to ON then other higher rating will automatically become ON. For individual rating system user can select ON or OFF for each level individually.

With LOADING ON if English or French Rating signal is detected, a “PRCC LOADING” message in red will appear on-screen.

If there is error in loading, the “PRCC LOADING” message will change color from red to white and data will not load.

Data will not load if the channel is change during loading.

The current English or French Ratings are automatically overwrite as new data are received.

BEFORE REQUESTING SERVICE

Before requesting service, check the following list of problems and solutions. You may be able to solve the problems yourself.

PROBLEM		SOLUTION
No Power	•	Make sure the unit is plugged in.
	• Unplug the unit from electrical outlet for 60 seconds. Then plug it
		in and turn it on again.
No Picture	•	Make sure the antenna is properly connected at the back of the
		TV.
	•	Make sure the antenna is not broken.
	• Adjust the brightness and contrast controls.
No Sound	•	Use the VOLUME (Up/Down) buttons to turn up the volume.
	• Make sure the sound is not muted by pressing the MUTE button.
No Color	•	Make sure the show is being transmitted in color by checking to
		see if another channel is in color.
	• Adjust the color control.
Wrong Color	•	Adjust the color and tint controls.
Picture Too	•	Adjust the brightness and contrast controls.
Light/Dark
Picture Interference	•	Check the antenna for shorted or broken wires.
	•	Reposition the antenna.
	•	Try another channel to make sure there is no station trouble or
		local interference (such as electric motors). If possible, minimize
		by adjusting the antenna.
Remote Control	•	Make sure batteries are inserted in the remote control.
Doesn’t Work	•	Make sure the remote control is aimed directly at the remote sensor
		on the TV.
Big black box	•	Press the TV/CAP/TEXT button until the CAP or TEXT box
on screen		disappears from the screen

MT1190C(En) 1 28/08/2001, 9:51 AM