Humax HDR-7500T user manual Error Message, Satellite

Appendix

Error Message

Error message	Possible causes	What to do
	The satellite dish is not pointing at the	Adjust dish alignment.
	satellite.
	Signal is too weak.	*ODSFBTF UIF -/# WPMUBHF PS DPOOFDU B
No or bad signal		signal amplifier.
[Satellite]	Satellite dish is too small.	Change to a larger dish.
	1SPCMFN XJUI -/#	$IBOHF UIF -/#
	Wrong antenna setting.	Set the antenna correctly.
	The cable is not connected.	Make sure the cable is connected
		correctly.
No or bad signal
	The cable may be damaged or	Exchange the cable.
[Cable]
	defective.
	The channel is not broadcasting.	Exchange the cable.
		Adjust aerial. Check the cable from
No or bad signal		the aerial. If you cannot resolve the
	The aerial is not pointing properly.	problem, you may need to have your
[Terrestrial]
		aerial and installation tested by a
		professional.
	The channel has a signal, but no audio	Confirm if the channel is currently on
	or video.	air.
The channel is
	The channel has been deleted by the	Check if the channel is currently on air
scrambled or not	broadcasting company.
available.
		Remove the channel from the channel
	The channel is for data broadcasting.	list and check for new transponder
		details.
The audio is not	The channel has a video signal, but no	Press the audio button to confirm that
available.	audio.	the channel has audio options.
	No access	Make sure you are subscribed to the
		channel.
No access		If the product has been turned off for
	No authorization.	a long time (standby or power off),
		please wait for authorization. It may
		UBLF VQ UP  NJOVUFT
No card inserted.	Smartcard is not inserted.	Insert Smartcard.

70