9.Installation
In this chapter you can configure the installation setting and perform channel search. Menus such as channels search, software update and default setting are included in this section.
Note: Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen.
9.1Channel Search
If your product is connected to the cable and TV, you can search channels manually by searching parameters, if you know the MUX information.
1. Press the MENU button.
2. Select Installation using the / button and press the OK button.
3. Select Channel Search using the / button and press the OK button.
4. Select Frequency and enter the frequency using the
5. Select Network ID and enter the value using the
6. Select Symbol Rate and press the OK and / button. Select the symbol rate and press the OK button. If the required value is not available, select User Define and enter the symbol rate directly.
7. Select Search and press the OK button to start channel search. Please wait for finishing the channel search. If you want to stop the operation during search, press the OK button.
8. Press the OK button to save the result.
GB48
User’s Manual