Setting Oven Controls contd | Kenmore 7857, 7862, 7852, 7854, 7859

Setting Oven Controls (cont'd)

Note: The indicator light located above the _	pad will glow
while the minute timer is active.

Note: The minute timer does not start or stop cooking. It

serves as an extra timer in the kitchen that will beep when the set time has run out. The minute timer can be used

alone or during any of the other oven functions. When the minute timer is in use with any other function, the minute timer will be shown in the display. To view other functions, press the pad for that function.

To Change the Minute Timer while it is in use:

While the timer is active and shows in the display, press and hold the J_, or V to increase or decrease the time.

To Cancel the Minute Timer before the set time has run

out: Press @.

Note: To turn the time of day display OFF or ON in the display press _'_ and hold for 15 seconds (the control

will beep once) and then release. This feature does not remove the set time of day from the memory of the control. When the display is turned OFF the time of day

will re-appear for a few seconds any time the _ pad is touched.

To Set or Change the Temperature for Baking The oven can be programmed to bake at any temperature from 170°F to 550°F (77°C to 287°C).

To Set the Controls for Baking:

1.Press 8,ke. " " appears in the display.

2.Within 5 seconds, press the A or V. The display will show "350°F (177°C). ''By pressing and holding the A or V, the temperature can then be adjusted

in 5°F increments (1°C if the control is set to display Celsius).

3.As soon as the A or V pad is released, the oven will

begin heating to the selected temperature. When the displayed temperature reaches the desired baking temperature, the preheat indicator light will turn OFF and the control will beep 3 times.

4.To cancel baking, press _.

To Change the Oven Temperature after Baking has Started:

1.Press B,koand make sure the bake temperature is

displayed.

2.Press the A or V pad to increase or decrease the set temperature.

To Set Control for Continuous Bake or 12

Hour Energy Saving

The oven control has a built-in 12 Hour Energy Saving feature that will shut off the oven if the control is left on for more than 11 hours and 59 minutes. The oven can be programmed to override this feature for continuous baking.

To set control for continuous baking:

1. Press and hold _ down for 5 seconds until tone is

heard, "---- hr" will appear in display for continuous

cooking. The current time of day will return to the display.

2.To cancel the Continuous Bake function, press

and hold for 5 seconds until tone is heard. "12hr" will appear in display indicating that the control has returned to the 12 Hour Energy Saving feature.

Oven

To Set Control for Oven Lockout _al Lockout

The control can be programmed to lock the oven door and

lockout the oven control pads.

To set Control for Oven Lockout feature:

1.Press _ and hold for 3 seconds. "Loc" will appear in

display, the "Door Locked" indicator light will flash and the motor driven door lock will begin to close automatically. DO NOT open oven door while the indicator light is flashing. Allow about 15 seconds for the oven door to lock. Once the oven door is locked, the current time of day will appear in the display.

2.To cancel the Oven Lockout feature, press _ and hold for 3 seconds. The control will unlock the oven doorand resume normal operation.

Note: if any control pad is pressed while in the oven Lockout model '!Lot' will appear in the display until the control pad is released.