Kenmore 7862, 7857, 7852, 7854, 7859 Oven Control Functions, Setting Oven Controls, To Set the Clock

Oven Control Functions

READTHEINSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactoryuseofyouroven, becomefamiiiarwith

the various pad functions of the oven as described below.

				BROIL	PAD Used to		UP and DOWN ARROW		PADS	Used along
				select	the variable	broil	with the function	pads to	select	oven
				function,			temperature, time	of day,	clean	time and
CLOCK			SET
PAD			Used
to set		the
time	of		day.				minute timer,
TIMER ON/OFF					0	Q	_			•
PAD	Used			to set
or cancel		the		minute
timer. The			minute

FEATURE INDICATOR

LIGHTS-- These light to show which feature is in

use.

BAKE PAD--Used to select the bake function.

timer aoes nol s_ar_

or stop COOKing.

Also.

TIMER ON/OFF aaa

S usea I( se][ IRe

Continuous Bake feature.

7

SELECTSELF-CLEAN

PAD-- Used to select the

Self-Cleaning cycle. A 2, 3 or 4 hour Self-Clean

time may be selected.

O

O

I

OVEN, PREHEAT & DOOR LOCKED LIGHTS* --The "OVEN" light will glow each time the oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when the oven is first set to operate, or if the desired temperature is reset higher than the actual oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and unlocks or when using the Self- Clean cycle or the oven door lockout is activated. The indicator light will glow constantly after the door locks.

STOP/CLEAR PAD--

Used to clear any function previously entered except the time of day and minute timer. Press STOP/CLEAR to

stop cooking. Also the

STOP/CLEAR pad is used to activate Oven

Lockout setting.

.........iiii

*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and

during Preheat This is norma! and indicates that the oven is cyc!ing tOmaintain the selected baking temperatu re. When the preheat indicator !!ght turns OFF, yaur oven is ready.

Temperature conversion

The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be programmed for any temperature from 170°F to 550°F (77°C to 287°C).

To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):

1. Press ",o_ .... appears in the display.

2.Press and hold the A until "HI" appears in the display.

3.Press and hold ",o'until °F or °C appears in the display.

4.Press the A or V to change °F to °C or °C to °F.

5.Press any control pad to return to normal operating mode.

Setting Oven Controls

Note: The time of daY must first beset in order to operate theoven.

To Set the Clock

When the range is first plugged in, or when the power

supply to the range has been interrupted, the display will flash "12:00".

1.Press @ once (do not hold pad down).

2.Within 5 seconds, press and hold the /_ or V until the correct time of day appears in the display.

Note: The clock cannot be changed during a Self-Clean cycle.

To Set the Minute Timer:

1.Press @.

2.Press the A to increase the time in one minute

increments. Press and hold the /% to increase the time in 10 minute increments. The timer can be set for

any amount of time from 1 minute to 11 hours and 59 minutes.

Note: If the V pad is pressed first, the timer will advance to 11 hours and 59 minutes.

3.The display shows the timer countdown in minutes until

1 minute remains. Then the display will countdown in seconds.

4.When the set time has run out, the timer will beep 3 times and will continue to beep 3 times every 60

seconds until @ is pressed.