FUNAI MSD125 owner manual Display Setting, Audio Setting

B DISPLAY Setting

You can change the display functions. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

4Select the desired item.

	or
DISPLAY menu
SETUP	DISPLAY
TV ASPECT	4:3 LETTER BOX
STILL MODE	AUTO
PROGRESSIVE OFF

5 TV ASPECT: QUICK

(Default: 4:3 LETTER BOX)

See Hint to the right.

TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
	ENTER

STILL MODE: (Default: AUTO)

See Hint to the right.

TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
	ENTER

Select the desired setting.

TV ASPECT
4:3 LETTER BOX	or
4:3 PAN & SCAN	ENTER
16:9 WIDE

Select the desired setting.

STILL MODE

AUTO	or
FIELD		ENTER
FRAME

6To exit the menu (for TV ASPECT

& STILL MODE)

SETUP

Hint

TV ASPECT:

•Select “4:3 LETTER BOX”, so that black bars may appear on the top and bot- tom of the screen.

•Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.

•Select “16:9 WIDE” if a wide-screen TV is connect- ed to this unit.

STILL MODE:

5 PROGRESSIVE: QUICK

(Default: OFF)

See Hint to the right.

TV ASPECT	4:3 LETTERBOX
STILL MODE	AUTO
PROGRESSIVE	OFF
	ENTER

	If you do not hit any buttons for 15 seconds,
	Progressive Scan will switch to “OFF”.
		Select
SETUP		YES.
	If Picture is good, Select “YES”.
	Confirm again to use progressive scan.
4:3 LETTERBOX
AUTO		or
ON	NO
	YES

SELECT: K / L SET:ENTER

• Select “AUTO” usually.

• If you select AUTO, automati-

cally select the best resolution

setting (FRAME or FIELD)

based on the datacharacteris-

tics of the pictures. (default).

• If you select “FIELD”, the

picture in the still mode will

be stabilized.

• If you select “FRAME”, the

picture in the still mode will

	If “PROGRESSIVE” is “ON”,
	this message appears:
6 To confirm the		Select
	Before proceeding…	YES.
PROGRESSIVE	1. Make sure your TV has progressive scan.	ENTER
	NOTE: If there is no picture or picture is
	2. Connect with component video cable
scanning mode	distorted after selecting “YES”,
	wait about 15 seconds for auto recovery.	or
	Activate Progressive?NO
ENTER	YES
	SELECT: K / L SET:ENTER

be highly defined.

• An individual picture on TV

screen is called as “frame”,

which consists of two sepa-

rate images called as “field”.

Some pictures may be blurred

at the AUTO setting instill mode

due to their data characteristics.

PROGRESSIVE:

•You can set “PROGRESSIVE” to “OFF” either in the Display menu or by pressing and hold- ing [PLAY B] on the front of the unit for more than 5 seconds.

•When “PROGRESSIVE” is “ON”, video signals from VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at all.

Functions

C AUDIO Setting

Choose the appropriate audio settings for your equipments. It only affects during the playback of DVD discs. Follow steps 1) to 3) in the “CUSTOM Menu” section on page 14.

4 Select the desired item.
	or
AUDIO menu
SETUP	AUDIO
DRC		ON
DOWN SAMPLING		ON
DOLBY DIGITAL		BITSTREAM

5

DRC (Dynamic Range Control): (Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC	ON	OFF
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM ENTER	BITSTREAM

DOWN SAMPLING: (Default: ON)

Set to “ON” when outputting in 48 kHz.

Set to “OFF” when outputting the original sound.

DRC	ON	ON
DOWN SAMPLING	ON	OFF
DOLBY DIGITAL	BITSTREAM	BITSTREAM
		ENTER
DOLBY DIGITAL:	QUICK	(Default: BITSTREAM)

Set to “BITSTREAM” when the unit is connected to a Dolby Digital receiver.

•BITSTREAM: Outputs a Dolby Digital Signals.

•PCM: Convert the Dolby Digital into PCM (2 channel).

DRC	ON	ON
DOWN SAMPLING	ON	ON
DOLBY DIGITAL	BITSTREAM	PCM

ENTER

6To exit the menu

SETUP

Hint

DRC:

•This function is available only on the discs which are recorded in the Dolby Digital format.

DOWN SAMPLING:

•When playing disc with copyright protection, the sound will be down sam- pled at 48kHz, even if you set to OFF.

•This function is available only on digital outputting of a disc recorded in 96kHz.

– 15 – EN