FUNAI MSD125 Installation Location, Avoid the Hazards of Electrical Shock and Fire, Maintenance

Page 4

Precautions

Installation Location

For safety and optimum performance of this unit:

Do not stand the unit up vertically. Install the unit in a horizontal and stable position. Do not place any- thing directly on top of the unit. Do not place the unit directly on top of the TV.

Shield it from direct sunlight and keep it away from sources of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations sub- ject to strong vibration or strong magnetic fields.

Be sure to remove the disc and unplug the AC power cord from the output before carrying the unit.

Avoid the Hazards of Electrical Shock and Fire

Do not handle the power cord with wet hands.

Do not pull on the power cord when disconnecting it from AC wall outlet. Grasp it by the plug.

If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing.

Moisture Condensation Warning

Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry.

About Copyright

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

Notice for Progressive Scan Outputs

Consumers should note that not all high definition televi- sion sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regard- ing your TV set compatibility with this 525p DVD player, please contact our customer service center.

Symbols Used in This Manual

The following symbols appear in some head- ings in this manual.

DVD-V

: Description refers to playback of DVD-Video discs.

CD

: Description refers to playback of Audio CDs.

Maintenance

SERVICING

¡Please refer to relevant topics on the “Troubleshooting Guide” on page 17 before returning the product.

¡If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-service- able parts inside. Turn off, unplug the power plug, and please call our help line mentioned on the front page to locate an Authorized Service Center.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild deter- gent solution. Do not use a solution containing alco- hol, spirits, ammonia or abrasive.

CLEANING DISCS

¡When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

¡Do not use solvents such as benzine, thinner, com- mercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for ana- log records.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although you refer to the relevant sections and to “Troubleshooting Guide” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

¡When you handle a disc hold it by its edge and try not to touch the surface of the disc.

¡Always store a disc in its protective case when it is not used.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade- marks of Dolby Laboratories.

– 4 –

EN

Image 4
Contents Supplied Accessory Table of ContentsConnecting to RF Modulator HintLaser Safety PrecautionsMake your contribution to the environment Important Safeguards Installation Location MaintenanceAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningPlayable Discs About the DiscsUnplayable Discs Connection to a TV Setup ConnectionsAfter you have completed connections Connection to an Audio System Rear TerminalsMethod Stereo system Analog audio input jacks AnalogAbout the Remote Control Remote ControlInstalling the Batteries for the Remote Control Keep in mind the following when using the remote controlFunctions PlaybackOn-Screen Display Marker Setup Search FunctionRepeat / Random / Programmed Playback Repeat Playback Repeat A-B PlaybackRandom Playback Programmed PlaybackSpecial Settings DVD Setup Quick Setup MenuLanguage Setting Custom MenuDisplay Setting Audio SettingTo Change the Password for Parental Controls Parental SettingOthers Setting Parental LevelsReset to the Default Setting except for Parental Setting Information Troubleshooting GuideProblem Solution Specifications Limited WarrantyLanguage List Language CodeEspañol Installing the Batteries For the Remote ControlQuick Use Guide Connections Playback